Networking cable ACT DA7952 Cat6a U/FTP (STP) Black 0.25 m with RJ-45 connectors, gold-plated contacts

ACT DA7952 is a 0.25 m Cat6a U/FTP (STP) slimline patch cable with RJ-45 connectors on both ends, designed for high-speed Ethernet and 10G applications. The cable has a reduced outer diameter to improve airflow in racks and cabinets and uses gold-plated RJ45 contacts to support reliable signal transfer. The black LSZH jacket limits smoke and toxic gas release in case of fire.

Advantages

The slimline design (approximately 3.8 mm outer diameter) and smaller bend radius save space and allow denser cable routing without compromising cable performance. Full copper 32AWG conductors and 50 µin gold-plated contacts ensure stable connections and resistance to corrosion. The LSZH jacket reduces hazardous emissions in case of cable damage by fire or short circuit, and the cable is manufactured and tested to meet international standards.

Suitable for

• Short patching runs in server racks and network cabinets
• Connections behind switches, patch panels and equipment with limited clearance
• 10G Ethernet links and high-speed LAN environments where shielded cabling is required

When it may not be suitable

This slimline CAT6A cable is optimized for short internal connections and tight spaces; it may not be the best choice for long horizontal runs where thicker, more robust cables provide easier handling and potentially lower attenuation over greater distances. If unshielded cabling is preferred or required by the installation, an unshielded Cat6A cable should be used instead.

Key specifications

• Cable category: Cat6a U/FTP (shielded pair with overall shielding)
• Length: 0.25 m
• Outer diameter: approximately 3.8 mm
• Conductor: full copper 32 AWG
• Connector type: RJ‑45 angled (90° down to 90° up)
• Contact plating: 50 µin gold-plated contacts
• Jacket material: LSZH (Low Smoke Zero Halogen)
• Power over Ethernet: supports PoE up to 30 W
• Colour: black

How to use

Route the cable through the rack or cabinet keeping bend radius as gentle as possible given its slim profile. Plug the angled RJ-45 connectors into the corresponding ports on switches, patch panels or devices; the 90° down to 90° up orientation is useful behind equipment where clearance is limited. Ensure shielded terminations and connected equipment are properly grounded if required by your installation.

What to consider before purchase

• Intended cable run length — this 0.25 m cable is for short patching only
• Shielding requirements — choose U/FTP if shielding is required
• Connector orientation — confirm 90° down to 90° up suits your rack layout
• Compatibility with PoE devices if power delivery is needed (supports up to 30 W)

Usage recommendations

Use this slimline ACT Cat6a U/FTP patch cable for short, high-density connections in racks and cabinets; maintain proper grounding for shielded cabling and avoid excessive bending beyond the cable's recommended radius to preserve performance.