ACT CAT6A U/UTP LSZH Slimline patch cable 0.5 m with RJ45 90° down to RJ45 90° down, black

ACT CAT6A U/UTP LSZH Slimline patch cable, 0.5 m, with RJ45 90° down connectors at both ends. The slimline cable has a reduced outer diameter (3.6 mm) compared with standard CAT6A patch cords, providing a smaller bend radius and improved airflow in server racks and network cabinets. The LSZH jacket minimizes the release of toxic gases in case of fire or cable damage. The cable uses full copper 28AWG conductors and 50µ gold-plated RJ45 contacts, and meets the ANSI/TIA-568.2-D standard.

Advantages

The slim 3.6 mm jacket reduces clutter and allows denser cable routing while maintaining the required bend radius for Cat6A performance. Dual RJ45 90° down connectors make this cable suitable for tight vertical spaces behind equipment and in patch panels without stressing connector or cable exits. LSZH material lowers the risk of harmful smoke and halogenated gases in the event of fire. Full copper conductors and gold-plated contacts support reliable high‑speed Ethernet transmission.

Suitable for

• Patching in server racks and network cabinets with limited space
• Connections behind network equipment where downward exit is required
• Short desktop or patch-panel links (0.5 m)
• Environments where low-smoke, zero-halogen cables are preferred for safety

When it may not be suitable

This slimline U/UTP cable is unshielded and therefore not intended for installations requiring shielded cabling to protect against strong electromagnetic interference. For longer runs than 0.5 m or where thicker cables are needed for mechanical protection, a standard-diameter Cat6A patch cord may be more appropriate.

Key specifications

• Cable type: Cat6A U/UTP (unshielded twisted pair)
• Length: 0.5 m
• Outer diameter: 3.6 mm
• Conductor: 28 AWG, full copper
• Connectors: RJ45 90° down to RJ45 90° down
• Contacts: 50 µin gold plating on RJ45 contacts
• Jacket material: LSZH (Low Smoke Zero Halogen)
• Standards: ANSI/TIA-568.2-D compliant
• Power over Ethernet: supports PoE up to 30 W
• Colour: Black

How to use

Insert each RJ45 90° down connector into the corresponding RJ45 port on the patch panel, switch or device, ensuring the downward exit direction fits the available space. Avoid sharp bends beyond the cable's minimum bend radius and do not compress the cable under heavy objects. Use the 0.5 m length for short patching runs between adjacent ports or for connections directly behind equipment.

What to consider before purchase

• Confirm 0.5 m length is sufficient for your patching needs
• Verify that unshielded U/UTP cabling is acceptable for your electromagnetic environment
• Ensure RJ45 90° down orientation matches port layout and clearance behind equipment
• Decide if LSZH jacket is required for your site safety regulations

Usage recommendations

Use this slimline CAT6A patch cable for short, high-density patching in racks and cabinets where space and airflow are priorities; pair with adjacent downward-facing ports to keep cable exits compact and unobstructed.