ACT CAT6A U/UTP LSZH Slimline patch cable 1 m, RJ45 90° down to RJ45 90° down, Black

ACT CAT6A U/UTP LSZH Slimline patch cable, 1 m long, designed for Cat6A performance in dense installations. The slim 3.6 mm outer diameter and reduced bend radius make this unshielded U/UTP cable suitable for tight routing in racks, cabinets and behind equipment while improving airflow. Both ends are fitted with 90° down RJ45 plugs and the jacket is Low Smoke Zero Halogen (LSZH) to reduce the release of toxic gases in case of fire or cable damage. The internal construction uses full copper 28AWG conductors and 50 µin gold-plated RJ45 contacts and conforms to ANSI/TIA-568.2-D.

Advantages

The slimline design reduces cable bulk and allows denser cable runs, which improves cooling and space usage in server racks and network cabinets. Angled-down RJ45 connectors enable clean, low-profile connections in confined spaces without compromising the cable bend radius. The LSZH jacket lowers the risk of high concentrations of toxic gases during fire, and the full-copper 28AWG conductors with gold-plated contacts ensure reliable signal transmission consistent with Cat6A standards.

Suitable for

• High-density server racks and data center patching
• Network cabinets with limited rear clearance
• Patch panels and switch ports where low-profile cable routing is required
• Workstations and wall outlets with constrained space

When it may not be suitable

This unshielded U/UTP cable is not intended for installations that require shielded cabling to protect against high electromagnetic interference (EMI). For environments with significant electrical noise or where shielded systems are specified, a shielded Cat6A cable would be more appropriate. Also, the 1 m length may be insufficient for longer runs between infrastructure points.

Key specifications

• Cable category: Cat6A U/UTP (unshielded)
• Length: 1 m
• Outer diameter: 3.6 mm
• Conductor: solid full copper, 28 AWG
• Contacts: 50 µin gold-plated RJ45 contacts
• Connector orientation: RJ45 90° down to RJ45 90° down
• Jacket: Low Smoke Zero Halogen (LSZH)
• Standards: conforms to ANSI/TIA-568.2-D
• Power over Ethernet: supports PoE up to 30 W
• Colour: Black

How to use

Connect each RJ45 90° down plug to the corresponding RJ45 port on switches, patch panels or devices, routing the slim cable along cable management channels or rack sides to maintain the reduced bend radius. The angled-down connectors are intended for use where rear clearance is limited; insert the plugs gently until the latch clicks. Avoid sharp bends and excessive pulling tension during installation to preserve cable performance and integrity.

What to consider before purchase

• Whether unshielded U/UTP cabling is suitable for your electromagnetic environment
• Required cable length and whether 1 m is sufficient for your connections
• Need for angled-down connectors versus straight or other angled orientations
• Fire-safety requirements where LSZH jacket is preferred or required

Usage recommendations

Use these slimline Cat6A patch cables for high-density rack and cabinet environments where improved airflow and low-profile routing are needed. For runs exposed to strong EMI or when longer distances are required, consider shielded cables or longer patch cords accordingly.