ACT CAT6A U/UTP LSZH Slimline patch cable 3 m with RJ45 90° down to 90° down, black

ACT CAT6A U/UTP LSZH Slimline patch cable, 3 m length, with RJ45 connectors angled 90° down at both ends. The cable uses a slim 3.6 mm diameter jacket to reduce congestion and improve airflow in server racks and network cabinets while supporting high-speed 10GbE networks. The LSZH outer jacket lowers the risk of toxic smoke in case of fire, and the cable features full copper 28AWG conductors with 50 µ gold-plated RJ45 contacts. Compliant with ANSI/TIA-568.2-D and 100% tested for reliable performance.

Advantages

The slimline design provides a smaller bend radius and reduced cable bulk compared to standard CAT6A patch cords, allowing tighter routing in confined spaces without compromising signal integrity. Dual 90° down RJ45 connectors enable neat terminations behind equipment and inside cabinets. The LSZH jacket offers improved safety in environments where smoke and toxic gas emissions must be minimised. Full copper conductors and gold-plated contacts support stable, low-loss connections suitable for PoE applications.

Suitable for

• Data centres and server racks with dense cable layouts
• Network cabinets and patch panels in offices
• Behind network equipment where vertical clearance is limited
• 10 Gigabit Ethernet (10GbE) links and standard office LAN connections
• Installations requiring LSZH-rated cabling for safety

When it may not be suitable

Because the cable is a slim U/UTP design, it may be less appropriate where additional shielding is required to protect against high electromagnetic interference (EMI). If installation environments demand shielded cables (e.g., high-EMI industrial sites), a shielded CAT6A variant would be more suitable.

Key specifications

• Cable category: Cat6A U/UTP
• Length: 3 m
• Outer jacket diameter: 3.6 mm
• Jacket material: LSZH (Low Smoke Zero Halogen)
• Conductor: solid full copper, 28 AWG
• Connector type: RJ45 to RJ45, both 90° down angled
• Contact plating: 50 µ gold-plated contacts
• Standards compliance: ANSI/TIA-568.2-D
• Power over Ethernet: supports PoE up to 30 W
• Colour: Black

How to use

Route the slimline patch cable between the two network ports ensuring the angled connectors align with the available clearance behind devices or along rack rails. Insert RJ45 plugs fully into the corresponding ports until the latch clicks. Avoid sharp bends beyond the cable’s recommended bend radius and secure cables with appropriate cable management to maintain airflow and prevent strain on the connectors.

What to consider before purchase

• Whether shielded cabling is required for your environment (this is an unshielded U/UTP cable)
• Available clearance behind equipment to ensure 90° down connectors fit
• Required cable length and whether 3 m meets routing needs
• LSZH requirement for building or safety regulations

Usage recommendations

Use these slimline CAT6A patch cables for dense rack and cabinet installations to improve airflow and keep cabling tidy; combine with proper cable management and avoid excessive bending to ensure long-term performance.