ACT S/FTP CAT6A B2ca PoE++ 100W prefab installation cable 35 m, RJ45 male–male (FB0035)

The ACT S/FTP CAT6A B2ca PoE++ 100W prefab installation cable 35 m, RJ45 male–male (FB0035) is a pre-terminated, solid-conductor network cable designed for high-performance Ethernet links and 4PPoE/PoE++ power delivery up to 100 W. The shielded S/FTP construction and full copper 23AWG conductors support 10 Gigabit Ethernet and maintain signal integrity over the 35 m length. The cable is delivered with RJ45 male-to-male connectors terminated using IDC contacts for reliable contact pressure and long-term stability, and it complies with ANSI/TIA-568.2-D and ISO/IEC 11801-1 standards. Its CPR Euroclass B2ca rating allows installation in environments with strict fire-safety requirements.

Advantages

The pre-terminated design eliminates field termination, reducing installation time and the risk of wiring errors. Shielded S/FTP construction provides improved crosstalk and electromagnetic interference protection compared with unshielded cables. Full copper 23AWG conductors combined with 50 µ gold-plated RJ45 contacts and IDC termination ensure consistent electrical performance and suitability for demanding PoE++ applications. The Euroclass B2ca classification and compliance with international cabling standards provide predictable mechanical and fire-safety behaviour for professional installations.

Suitable for (tasks / use cases)

• 10 Gigabit Ethernet backbone and horizontal links up to 35 m
• 4PPoE / PoE++ device powering up to 100 W (Type 4) such as high-power access points, PTZ cameras, and signage
• Data centers, server rooms and network closets requiring high fire-safety classification
• Structured cabling plug-and-play connections between switches, patch panels and networked devices
• HDBaseT installations and AV signal distribution where shielded Category 6A cabling is required

When it may not be suitable

This pre-terminated solid installation cable is intended for fixed installations and is not optimized for frequent flexing or use as a patch cord in dynamic environments. The fixed 35 m length may be excessive for short patching needs and may not be suitable where custom lengths or frequent re-routing are required. For field termination or bespoke connector types, an unterminated cable or modular solutions would be more appropriate.

Key specifications

• Cable type: Shielded S/FTP CAT6A (S-STP)
• Length: 35 m
• Conductor: Solid copper, 23 AWG
• Connectors: RJ45 male to RJ45 male with IDC termination and 50 µ gold-plated contacts
• Power over Ethernet: Supports 4PPoE / PoE++ up to 100 W
• Standards: Compliant with ANSI/TIA-568.2-D and ISO/IEC 11801-1
• Fire performance: CPR Euroclass B2ca
• Typical applications: 10GBASE-T, HDBaseT, high-power PoE devices
• Colour: Blue

How to use

Route the pre-terminated cable from the network equipment to the destination device or patch point, following standard installation practices for fixed cabling and maintaining appropriate bend radii and separation from power sources. Insert the RJ45 male connectors into corresponding ports on switches, patch panels or devices; no additional termination tools are required. Ensure cable routing and strain relief are applied to avoid mechanical stress on the connectors. Verify link and PoE operation using network test tools after installation.

What to consider before purchase

• Fixed length: 35 m pre-terminated cable may be longer than needed for short patching scenarios
• Intended for fixed installation, not as a frequently-moved patch cord
• Verify the receiving equipment supports 4PPoE / PoE++ up to 100 W if powering devices via PoE
• Ensure routing and bend radius requirements for CAT6A shielded cable are met during installation

Usage recommendations

For reliable performance, keep the cable run within recommended lengths, maintain correct bend radius and grounding practices for shielded cabling, and test both data throughput and PoE delivery after installation. Use this pre-terminated ACT S/FTP CAT6A cable in permanent horizontal runs, patch panels, and device interconnects where high fire-safety classification and 100 W PoE capability are required.