Alantec network cable F/UTP Cat.5e LSOH Dca 4x2x24 AWG 1Gb/s 250 MHz 25-year warranty gray 3 m

Alantec F/UTP Category 5e network cable, 3 m in length, is designed for structured LAN environments, patch panels and horizontal cabling. The cable features four twisted pairs of 24 AWG conductors (4x2x24 AWG) and an F/UTP topology that shields the overall bundle with an aluminium foil to reduce external electromagnetic interference while keeping pair-level flexibility. The LSOH (low smoke, halogen-free) outer jacket with a Dca fire performance rating provides safer behaviour in the event of fire and reduces toxic emissions in enclosed spaces. The cable supports data transmission up to 1 Gb/s and a bandwidth of 250 MHz and is suitable for typical office and data closet installations.

Advantages

This Cat5e F/UTP cable combines a compact 3 m length with 24 AWG conductors to maintain signal integrity for Gigabit Ethernet over short links. The foil-shielded design improves immunity to external noise sources compared with unshielded alternatives, while the low-smoke halogen-free jacket enhances safety in public or confined areas. The Dca fire rating aligns the cable with common building requirements for commercial interiors. Certification by an independent testing body and a long-term warranty back the cable’s manufacturing quality and reliability.

Suitable for

• Patch connections between switches and wall outlets in offices
• Horizontal cabling runs in data closets and telecom rooms
• Endpoint connections for IP phones, desktop PCs and VoIP devices
• Short permanent links in structured cabling where shielded overall protection is preferred

Key specifications

• Cable category: Cat.5e
• Topology: F/UTP (foil screened overall)
• Conductor arrangement: 4 pairs of 24 AWG copper
• Data rate support: up to 1 Gb/s
• Bandwidth: up to 250 MHz
• Jacket material: LSOH (low smoke, halogen-free)
• Fire performance class: Dca
• Colour: gray
• Length: 3 m
• Typical use: structured LAN, patching, horizontal cabling

How to use

Use this Alantec Cat5e F/UTP cable as a patch lead between network devices such as switches, routers and wall outlets. Inspect connectors and cable jacket before installation to ensure no visible damage. Route the cable without tight bends and avoid routing alongside high-voltage power lines to minimise interference. Terminate or plug directly into compatible RJ45 ports rated for Cat5e performance; ensure connections are fully seated to maintain Gigabit link integrity. For permanent installations, secure the cable with appropriate management accessories to prevent strain on connectors.

Usage recommendations

For best performance, keep individual cable runs under recommended maximum lengths for patching (typically within the horizontal channel) and avoid excessive untwisting of pairs during termination. When installing in high-interference environments, ensure proper grounding of associated equipment and consider shielded connectors or higher-category cabling if necessary.