PoE Converter ALFA PD-1000R 1000Mbps 802.3af for Single-Port Devices

ALFA PD-1000R 1000Mbps 802.3af PoE Converter for Single-Port Devices separates power from data on a powered Ethernet link to enable non-PoE network equipment to operate from a PoE source. The device supports IEEE 802.3af power delivery and 1000 Mbps data throughput, allowing single-port access points, IP cameras and similar devices to be connected without a local power outlet. Compact and straightforward to install, the PD-1000R converts incoming PoE to a separate DC power output and passes through data to the connected device, simplifying deployments where running separate power cabling would be impractical.

Advantages

The ALFA PD-1000R provides a practical solution for powering single-port devices from an 802.3af PoE feed while maintaining gigabit data rates. It eliminates the need to modify end devices or provide nearby AC power by extracting PoE power and presenting it as a compatible power output. Its compatibility with standard PoE infrastructure and transparent data passthrough reduce installation complexity and enable flexible device placement in ceilings, poles or remote locations.

Suitable for

• Single-port wireless access points that lack built-in PoE support
• IP cameras and surveillance devices requiring external power
• Network devices installed in remote or hard-to-reach locations without AC outlets

Key specifications

• PoE standard supported: IEEE 802.3af
• Maximum data throughput: 1000 Mbps (gigabit)
• Device type: PoE to DC power converter for single-port equipment
• Function: Separates PoE power from Ethernet data; provides DC power output while passing data

How to use

Connect the incoming PoE Ethernet cable from a PoE switch or injector to the PD-1000R input. Attach the converter's Ethernet output to the network port of the target single-port device and connect the converter's DC power lead to the device's power input, observing proper polarity and connector fit. After connection, the PD-1000R will extract power from the PoE feed and supply DC power to the device while forwarding network data at gigabit speeds. No device configuration is required on most compatible equipment.

Usage recommendations

Use the PD-1000R with IEEE 802.3af-compliant PoE sources and verify that the target device's power requirements match the converter's DC output specifications. Ensure cable runs and connectors are in good condition to maintain reliable gigabit connectivity and stable power delivery.