Brass threaded connector Alkotest ŚW2012 female thread G1/2 x ø20 welded fitting

Brass threaded connector Alkotest ŚW2012 female thread G1/2 x ø20 welded fitting is a compact brass adapter designed to join pipes or hoses with a matching male G1/2 thread to a 20 mm outer-diameter pipe. The welded construction ensures a stable mechanical bond and reliable leak-tight performance for water and other non-corrosive fluids in plumbing, heating, and general repair applications.

Advantages

The connector is manufactured from brass for corrosion resistance and good mechanical strength. Its female G1/2 thread provides a standardized, compatible connection for common plumbing fixtures and fittings. The welded fitting design reduces the risk of loosening and enhances long-term durability under typical domestic and light-commercial conditions.

Suitable for

• Connecting threaded G1/2 fittings to 20 mm outer-diameter pipes
• Domestic water supply lines and repairs
• Light commercial plumbing and heating circuits
• Non-corrosive liquid transfer where a compact threaded transition is needed

Key specifications

• Material: brass
• Thread type: female G1/2 (BSPP-compatible)
• Connected pipe outer diameter: 20 mm
• Connection method: welded fitting
• Intended media: water and non-corrosive liquids

How to use

Ensure mating male thread and pipe dimensions match the connector: male G1/2 thread on one side and a 20 mm outer-diameter pipe on the other. Clean mating surfaces and apply appropriate thread sealant or tape if required by the installation standards and operating pressure. Thread the male fitting into the female G1/2 thread by hand to start, then tighten with a suitable wrench until secure; avoid over-torquing to prevent thread damage. For the 20 mm pipe end, ensure proper alignment and mechanical support of the pipe to maintain a leak-tight joint.

Usage recommendations

Use the connector only with compatible materials and within standard pressure and temperature ranges for brass fittings. Avoid exposure to strongly corrosive chemicals or media containing chlorides that could accelerate brass dezincification. Periodically inspect threaded joints and support piping to prevent mechanical stress and ensure long-term performance.