Masking Tape Ammo #3 10 mm x 25 m – Ammo brand precision masking tape

Masking Tape Ammo #3 10 mm x 25 m is a narrow, precision masking tape designed by Ammo for fine-scale painting and detailing. At 10 mm width and 25 m length, the tape offers consistent adhesion and a thin backing that conforms to small contours and trim without lifting paint or leaving residue when removed correctly. The product is intended for use where accurate paint lines and delicate surface protection are required.

Advantages

This 10 mm masking tape delivers clean, crisp paint edges and controlled adhesion suitable for delicate model surfaces. The tape backing is thin enough to follow curved or irregular shapes while maintaining dimensional stability so that masking stays in place during painting and airbrushing. It removes cleanly in most cases, minimizing surface damage and residue when peeled off at the proper angle and time.

Suitable for

• Scale model painting and detailing
• Masking small trims, panel lines and fine edges
• Protecting delicate surfaces during airbrushing and hand painting
• Accurate multi-color paintwork on miniature parts

Key specifications

• Width: 10 mm
• Length: 25 m
• Type: Narrow precision masking tape for fine work
• Backing: Thin conformable paper backing suitable for small radii
• Adhesive: Low- to medium-tack adhesive formulated for clean removal from delicate surfaces

How to use

Clean and dry the surface before applying the tape to ensure reliable adhesion. Cut or tear an appropriate length and press the tape firmly along the edge you want to protect, smoothing out any wrinkles or bubbles. For curved or irregular shapes, apply in short overlapping sections to maintain conformity. Paint over the exposed areas and allow the paint to dry to the manufacturer’s recommended tack or curing stage before removing the tape. Remove the tape slowly at a low angle to minimize the risk of lifting paint.

Usage recommendations

For best results with model paints and airbrushing, test the tape on a scrap surface first to confirm adhesion and removal behavior. Avoid prolonged exposure to strong solvents or high heat while masked, and remove the tape within a reasonable time after painting to reduce the chance of adhesive transfer.