Massage Bath AMUE AMO-0057-135 Double — 135x135 cm hydro-massage tub with dual seating

Massage Bathtub AMO-0057-135 is a corner double-seat massage bath built on a stable stainless steel frame and finished with acrylic coating. With dimensions of 135 x 135 x 63 cm it includes two headrests, integrated pumps for water and air, an ozone generator and a 1.5 kW inline water heater. The design features a glazed front panel, sensor control panel, built-in radio and speaker, hand shower and mixer for convenient operation.

Advantages

The bathtub combines both water and air massage functions with a dedicated aeration regulator and a pipe drying system to reduce maintenance. Large stainless-steel water jets and multiple smaller jets provide targeted hydromassage, while simultaneous operation of water and air pumps increases massage intensity. SPA lighting with seven colours and integrated ozone sanitation improve the bathing experience and hygiene.

Suitable for

• Home bathrooms with corner layout
• Two people bathing or shared use
• Relaxation and hydrotherapy sessions
• Spaces requiring integrated audio and mood lighting

When it may not be suitable

Because the tub is a corner version mounted on one side only, it may not fit installations that require mounting on two sides or non-corner layouts. The dimensions (135 x 135 x 63 cm) and minimum water capacity (approx. 250 L) mean it requires sufficient floor space and water supply capacity.

Key specifications

• Type: Corner massage bathtub, double seat
• Dimensions: 135 x 135 x 63 cm
• Seats: 2 with 2 headrests
• Coating: Acrylic
• Frame: Stainless steel construction
• Water jets: 2 large + 10 small (stainless-steel 2" jets for large)
• Air jets: 8
• Pumps: Water pump + 200 W air pump (can operate simultaneously)
• Water heater: 1.5 kW
• Sanitation: Ozone generator
• Controls: Sensor control panel
• Lighting: SPA light with 7 colours
• Extras: Hand shower, mixer, faucet, radio and speaker, drain plug
• Water level sensor and aeration regulator
• Approximate capacity: min. 250 L
• Weight (empty): 65 kg

How to use

Install the bathtub in a corner position according to the manufacturer’s mounting instructions, ensuring stable connection to the 230 V power supply and appropriate plumbing for water supply and drainage. Fill the tub to the recommended level, switch on the pumps and select the desired massage modes using the sensor control panel. Adjust aeration with the aeration regulator, set SPA lighting and radio as needed, and use the mixer or hand shower for rinsing. After use, activate the pipe drying system to help remove residual water from the circulation pipes.

What to consider before purchase

• Verify available floor space and corner layout compatibility (135 x 135 cm footprint)
• Ensure electrical supply of 230 V and appropriate circuit capacity for pumps and heater
• Confirm plumbing connections and drainage capacity for minimum 250 L water volume
• Consider access for installation and maintenance, given stainless-steel frame and mounted side

Usage recommendations

For reliable operation, follow the installation and electrical connection instructions, run regular ozone sanitation cycles and use the pipe drying system after each use. Avoid using abrasive cleaners on the acrylic surface and check seals periodically to maintain performance and hygiene.