Bend 50/30 ARMAKAN 5775324 — pipe elbow 50 mm to 30 mm

ARMAKAN Bend 50/30 model 5775324 is a polypropylene (PP) pipe elbow that connects a 50 mm pipe to a 30 mm pipe, providing a compact 30° change in direction and a diameter transition for internal wastewater and drainage systems. The grey PP construction offers chemical resistance, impact strength and a smooth internal surface that reduces deposit build-up and simplifies maintenance. The fitting is suitable for installations where a reliable, tight connection and controlled flow direction between different pipe diameters is required.

Advantages

The ARMAKAN 50/30 bend is made of high-quality PP, ensuring durability in intensive use and resistance to common chemicals found in wastewater. Its smooth inner surface minimizes clogging and supports steady flow, while the connection design enables quick, hermetic assembly that reduces installation time. The compact 30° geometry allows space-efficient routing in confined installation areas.

Suitable for

• Internal wastewater and drainage systems in residential and commercial buildings
• Plumbing installations requiring a diameter transition from 50 mm to 30 mm
• HVAC condensate drain lines and similar low-pressure drainage applications
• Situations where a compact 30° directional change is needed

Key specifications

• Brand: ARMAKAN
• Model / MPN: 5775324
• EAN: 5904215775324
• Material: Polypropylene (PP)
• Colour: Grey
• Connection: Elbow fitting, 50 mm to 30 mm
• Angle: 30°

How to use

Select matching 50 mm and 30 mm PP pipes or compatible fittings, ensure pipe ends are clean and free of debris, then insert the pipes into the corresponding ends of the elbow according to the manufacturer's assembly method (push-fit or solvent-weld if specified). Verify alignment to achieve the required 30° direction and confirm that connections are seated securely to provide a watertight joint. Support nearby pipe runs as needed to avoid stress on the fitting.

Usage recommendations

Do not expose the PP fitting to open flame or temperatures above the manufacturer's specified limits. Use appropriate seals or adhesives only if recommended by the manufacturer, and perform a pressure or leak test after installation to confirm system integrity.