Power over Ethernet Injector Auerswald COMfortel PoE-1000

The Auerswald COMfortel PoE-1000 is a compact Power over Ethernet injector designed to supply 48 V DC power to PoE-capable devices while passing Gigabit Ethernet data. Supporting 10/100/1000 Mbit/s data rates and compliant with IEEE 802.3af, the PoE-1000 separates power and data delivery for installations where a PoE switch is not available or additional midspan power is required. The unit accepts a wide AC input range of 100–240 V at 50 Hz and is finished in a discreet black housing with a lightweight form factor suitable for confined spaces and desktop deployment.

Advantages

The COMfortel PoE-1000 provides reliable 48 V PoE injection while maintaining full Gigabit throughput for connected endpoints. Its IEEE 802.3af compliance ensures interoperability with a wide range of IP phones, wireless access points, small network cameras and other 802.3af-compatible devices. The small footprint and low weight simplify mounting and handling during installation, and the simple two-port RJ-45 design reduces cable complexity in retrofit and new-build scenarios.

Suitable for

• Powering IP phones and small VoIP devices that require 48 V PoE
• Supplying power to Gigabit wireless access points in locations without PoE switches
• Providing midspan PoE to network cameras or other edge devices during retrofits
• Temporary or desktop network setups where a compact PoE injector is needed

Key specifications

• PoE voltage: 48 V DC
• Data rates: 10 / 100 / 1000 Mbit/s (Gigabit Ethernet)
• PoE standard: IEEE 802.3af compatible
• Ports: 2 × Ethernet LAN (RJ-45)
• AC input: 100–240 V, 50 Hz
• Colour: Black
• Dimensions: 47 × 67 × 90 mm
• Weight: 0.096 kg

How to use

Connect the injector's AC power lead to a mains outlet within the specified 100–240 V range. Use a standard RJ-45 patch cable from your network switch or router to the data-in RJ-45 port on the injector, then connect the data+power RJ-45 output port to the PoE device. Ensure the connected device is IEEE 802.3af compatible and that cable runs conform to Ethernet cabling standards for Gigabit operation. Verify that the device receives power and network connectivity after connections are complete.

Usage recommendations

For reliable long-term operation, install the PoE injector in a ventilated area away from direct heat sources and moisture. Use high-quality Cat5e or Cat6 cabling for Gigabit links and keep cable lengths within Ethernet limits to avoid voltage drop and reduced data performance.