A curated selection of maximum value offers!
In cart {{totalProductsCount}} item(s)
Your cart is empty
Avocent MPUIQ-VMCHS cable interface/gender adapter VGA (D-Sub) with USB 2.0, 0.3556 m, black/blue
The Avocent MPUIQ-VMCHS cable interface/gender adapter combines a VGA (D-Sub) connector and a USB 2.0 connection in a compact 0.3556 m assembly. It is intended for use with KVM over IP switches and server-management appliances to provide a VGA video and USB interface between a server and an Avocent KVM switch. The cable is supplied in a two-tone black and blue housing and weighs approximately 91 g.
The MPUIQ-VMCHS provides a single, short connection that carries analogue VGA video and USB 2.0 signals, simplifying cabling at the server end. It supports virtual media and remote troubleshooting when used with compatible Avocent KVM switches, and its compact length helps reduce excess cable clutter in rack environments.
This cable does not convert digital video standards (such as DVI, HDMI or DisplayPort) to VGA and will not provide higher-speed USB than USB 2.0. It is not suitable where longer reach is required—one cable is needed per server and the fixed length is approximately 0.3556 m.
Connect the VGA (D-Sub) plug and the USB 2.0 plug to the corresponding server ports, then route the other end to the port on the Avocent Autoview or MergePoint Unity KVM switch. Ensure connectors are secured and the cable is not strained. After physical connection, use the KVM switch web or local interface to configure the server port and enable virtual media or smartcard authentication features if supported.
For reliable operation, use one MPUIQ-VMCHS cable per server connection and avoid tight bends near the connectors; for virtual media and remote troubleshooting, confirm firmware compatibility between the KVM switch and connected server.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}
{{ productComparisonGenerationError }}