Submersible pump AWTools 900W 3in1 with float

The AWTools submersible pump AWTools 900W 3in1 with float is a compact electric pump designed for removing water from flooded areas, basements, pools and other applications requiring reliable drainage. Equipped with a 900W motor and a 3in1 configuration, this pump combines continuous pumping, intermittent operation and waterproofing features in a single housing. An integrated float switch enables automatic start and stop according to water level, reducing the need for manual control during routine draining tasks.

Advantages

The 900W motor provides strong flow capacity for rapid water removal while the 3in1 design offers versatile operation modes within one device. The built-in float switch ensures automatic activation and deactivation at preset water levels, improving safety and convenience. Robust construction and corrosion-resistant materials deliver extended service life when used in typical residential and light commercial environments.

Suitable for

• Draining flooded basements and cellars
• Emptying garden ponds and swimming pools
• Water removal from construction sites and excavation pits
• Emergency household water extraction after leaks or heavy rain

Key specifications

• Rated power: 900 W
• Design: submersible 3in1 pump with integrated float switch
• Operation: automatic on/off via float switch
• Intended use: water drainage and dewatering
• Construction: corrosion-resistant housing suitable for freshwater

How to use

Place the pump on a stable, level surface at the lowest point of the flooded area or pool. Connect the discharge hose to the outlet and route it to a safe drainage location. Plug the pump into a properly grounded electrical outlet. The float switch will activate the pump automatically when water reaches the switch activation level and stop the pump when the water falls below the shutdown level. For intermittent manual use, position the float to the desired height before powering on.

Usage recommendations

Before each use, inspect the pump and power cable for damage and ensure the discharge hose is clear. Avoid pumping abrasive solids or highly contaminated liquids; use this pump for clean or lightly laden water. Do not run the pump dry for extended periods. Store the pump in a dry place and rinse with clean water after use in sandy or silty conditions.