Cable ladder Baks DKD400H60/3N (MPN 465140) — metal cable tray ladder, 400 mm width, 60 mm rung spacing, 3 m length

Baks DKD400H60/3N is a metal cable ladder designed to support and route power and control cables in industrial and commercial installations. The product provides a ventilated, rigid pathway for cable runs with a clear width of 400 mm, 60 mm spacing between rungs and a 3 m section length. Constructed from metal for mechanical strength and long service life, this cable tray ladder is intended for fixed cable routing where load-bearing capacity and accessibility are required.

Advantages

The metal ladder design offers solid mechanical support and good ventilation for cable bundles, reducing heat build-up. Uniform 60 mm rung spacing makes it easy to secure cables and accessories while maintaining consistent load distribution. The 400 mm clear width provides a balance between compact footprint and capacity for multiple power and control conductors. The 3 m section length reduces the number of joints required in long runs, simplifying installation and lowering the number of couplers needed.

Suitable for

• Industrial and commercial cable routing along walls, ceilings and cable corridors
• Power distribution and control cable support in factories, warehouses and utility rooms
• Applications requiring ventilated trays to limit cable heating
• Installations where accessibility for inspection and cable changes is needed

When it may not be suitable

This metal cable ladder is not intended for use as a sealed or dust-tight enclosure; it provides open support and ventilation rather than environmental protection. It may not be suitable for installations that require extremely narrow cable trays or where non-metallic, corrosion-resistant materials are mandatory without additional coatings or treatments.

Key specifications

• Clear width: 400 mm
• Rung spacing: 60 mm
• Section length: 3 m
• Material: metal (steel)
• Configuration: ladder-type cable tray with rungs

How to use

Install the ladder sections along the planned cable route using appropriate supports and fasteners rated for the expected load. Align adjacent sections and secure joints with compatible couplers or brackets. Lay cables on the rungs and fasten them with suitable ties or clamps at recommended intervals to maintain order and load distribution. Provide additional support near bends, splices and equipment entry points. Ensure earthing/grounding and bonding are completed in accordance with local electrical codes.

What to consider before purchase

• Required load capacity and planned cable fill to verify 400 mm width is sufficient
• Environmental conditions and whether additional corrosion protection or coating is needed
• Support spacing and hardware compatibility for 3 m sections
• Clearance for bends, accessories and equipment entries

Usage recommendations

For durable performance, use supports rated for steel ladder trays and maintain recommended support intervals. When routing mixed cable types, separate power and sensitive control or communication circuits as required by standards. Inspect fastenings and corrosion protection periodically and tighten or replace components as needed to ensure continuous mechanical integrity.