Underground telecommunication cable BITNER XzTKMXpw 3×2×0.5 — 3 pairs, 0.5 mm conductor

BITNER XzTKMXpw 3×2×0.5 is an underground telecommunication cable engineered for buried installation. It contains three twisted pairs with 0.5 mm conductor diameter, designed for low-voltage signal and voice transmission over short distances. The cable construction focuses on durability in outdoor buried environments and is intended for telecom lines, telephone connections and similar signal cabling where mechanical protection and moisture resistance are required.

Advantages

The cable’s twisted-pair design reduces crosstalk between conductors and supports stable voice and low-frequency signal transmission. Its dedicated underground construction provides mechanical strength and protection against soil moisture and typical burial stresses. A consistent conductor diameter of 0.5 mm ensures predictable electrical characteristics for planning and installation. The simple three-pair configuration makes the cable easy to route and terminate for standard telecommunication junctions.

Suitable for

• Buried telecommunication lines for voice and low-voltage signaling
• Telephone extensions and local PBX connections
• Short-distance campus or site cabling where underground routing is required
• Temporary or permanent outdoor signal runs protected by soil cover

Key specifications

• Number of pairs: 3 twisted pairs
• Conductor diameter: 0.5 mm
• Application: underground telecommunication and voice signal transmission
• Cable type: twisted pair, suitable for buried installation
• Intended signal level: low-voltage telephony and similar signals

How to use

Route the BITNER XzTKMXpw cable in compliance with local regulations for underground cabling, maintaining appropriate burial depth and separation from power lines. Prepare cable ends by carefully stripping the outer sheath and individual pair insulation to avoid nicking conductors. Terminate pairs on appropriate telecommunication connectors or terminal blocks, observing pair polarity and twisting to preserve signal integrity. Where required, protect transitions with junction boxes or conduit to reduce water ingress at connection points.

Usage recommendations

Verify soil conditions and local installation codes before burial. Use warning tape or conduit in environments with potential mechanical damage. For runs longer than typical short-distance applications, check signal attenuation and consider repeaters or different cable types if necessary.