Submersible Pump Blaupunkt WP7501

The Blaupunkt WP7501 submersible pump is a 750 W electric pump designed for removing, transferring and circulating water in domestic and light professional settings. With a rated flow of up to 11,000 litres per hour and a maximum immersion depth of 7 m, the unit handles fast water evacuation and continuous operation within its specified limits. The pump is finished in blue and grey and comes with a 10 m power cord to allow flexible placement while remaining powered from a single outlet. It runs on standard 230–240 V AC at 50 Hz and has a compact footprint measuring 220 mm width, 160 mm depth and 340 mm height.

Advantages

The WP7501 offers a high flow rate relative to its size, enabling efficient water removal from basements, ponds, tanks and flooded areas. Its maximum delivery height of 7.5 m supports moderate-pressure discharge applications, while the 10 m cable increases operational reach without additional extension equipment. The pump’s build and rated power are suitable for continuous or intermittent use in typical household and light-duty professional tasks.

Suitable for

• Pumping out flooded cellars and garages
• Emptying garden ponds and water features
• Transferring water between tanks or containers
• General irrigation and garden drainage
• Construction site dewatering for small areas

Key specifications

• Rated power: 750 W
• Maximum flow rate: 11,000 l/h
• Maximum immersion depth: 7 m
• Maximum delivery height (head): 7.5 m
• Supply voltage and frequency: 230–240 V AC, 50 Hz
• Cable length: 10 m
• Color: blue and grey
• Dimensions (W × D × H): 220 × 160 × 340 mm

How to use

Place the pump on a stable, level surface in the water to be removed, ensuring the intake is not blocked by debris. Connect the pump to a suitable discharge hose and route the hose to the desired outflow location. Plug the power cord into a properly grounded outdoor or protected indoor socket compatible with 230–240 V AC. Operate the pump within the recommended immersion and head limits and monitor the pump during initial operation to confirm stable flow and correct positioning. After use, disconnect power, drain residual water from the pump and hose, and store the unit in a dry place.

Usage recommendations

The pump is intended for clean or slightly dirty water; avoid pumping heavily contaminated or abrasive liquids. Regularly inspect and clean the intake and impeller area to maintain performance. Use a hose and fittings rated for the specified delivery height and secure electrical connections with residual-current protection where required by local regulations.