Charger BlitzWolf BW-S28 260W with 2× USB-A and 3× USB-C

The BlitzWolf BW-S28 260W with 2× USB-A and 3× USB-C is a multiport GaN charger designed to power multiple devices simultaneously. It combines five wired ports and a 15W wireless charging pad in a compact black housing, delivering a total output of up to 260 watts. The charger includes a digital display that shows real-time voltage and current per port and a touch control to toggle the display. Built with PC+ABS housing and GaN technology, the unit aims to provide efficient power delivery with reduced heat and a smaller footprint compared with traditional silicon chargers.

Advantages

The BW-S28 supports high-power USB-C output up to 140W on the primary port and up to 100W on the other USB-C ports, enabling fast charging for laptops, tablets and phones. Its five-port layout (2× USB-A, 3× USB-C) plus a wireless pad allows simultaneous charging of multiple devices, while compatibility with PD3.1, QC4+, PD3.0, QC3.0, PPS and other protocols ensures broad device support. Built-in protections for overcurrent, overvoltage, overheating, short circuit and overcharging enhance safety during everyday use.

Suitable for

• Charging multiple smartphones, tablets and accessories at the same time
• Powering laptops and high-draw devices via the 140W USB-C port
• Home and office use where several devices need consolidated charging
• Travel use when reducing the number of separate chargers is desired

When it may not be suitable

The BW-S28 is relatively compact for a 260W charger but still heavier and larger than a single-port phone charger, so it may not be the best option if absolute minimal weight and size are required for ultra-light travel. Additionally, devices that require proprietary charging connectors or non-standard protocols not listed among the supported standards may not achieve maximum charging speeds.

Key specifications

• Total output power: 260 W
• Ports: 3× USB-C, 2× USB-A, plus 15W wireless charging pad
• USB-C1 maximum: up to 140 W (PD3.1, PPS supported)
• USB-C2 / USB-C3 maximum: up to 100 W each (PD3.0, PPS supported); combined C2+C3: 45 W + 45 W
• USB-A maximum per port: up to 22.5 W (QC3.0 compatible); combined A1+A2: 12 W + 12 W
• Wireless charging: 15 W / 10 W / 7.5 W / 5 W
• Supported fast-charge standards: PD3.1, QC4+, PD3.0, QC3.0, QC2.0, PPS, SCP, FCP, AFC, PE
• Input: AC 100–240 V, 50–60 Hz
• Material: PC + ABS
• Dimensions: 126 × 116 × 50 mm
• Weight: 542 g

How to use

Place the charger on a flat, stable surface and position a compatible phone on the wireless pad if using wireless charging. Connect the included power cable to AC mains (100–240 V). Use appropriate USB-C or USB-A cables to connect devices to the desired ports. The digital display will show voltage and current parameters for active ports; use the touch control to switch the display on or off. Distribute connected devices across ports following power requirements — use the USB-C1 port for the highest power devices such as laptops and tablets to take advantage of its 140W output.

What to consider before purchase

• Check that your devices support the listed fast-charging protocols to achieve maximum speeds
• Ensure cable quality and specifications match device power requirements (USB-C PD-rated cables for high-watt charging)
• Consider the charger’s weight and dimensions if you frequently travel with it
• Verify that the device count and port types match your typical charging needs

Usage recommendations

For best results, connect high-draw devices to the USB-C1 port and use PD-rated cables for laptop charging. Avoid blocking ventilation during extended charging sessions and keep the silicone surface clean for stable wireless charging. If multiple high-power devices are used simultaneously, monitor the digital display to balance loads across ports.