Patchcord UTP 8‑core BLOW 15 m – RJ45 plug to plug, unshielded ethernet cable

UTP patchcord BLOW, 8-core, 15 m with RJ45 plug-to-plug connectors, designed for Ethernet networks using unshielded twisted-pair copper cabling. This cable provides a straightforward copper connection for data transmission between network devices such as switches, routers, patch panels and wall outlets in office or home LAN environments. The cable's RJ45 terminations enable plug-and-play installation for standard Ethernet ports.

Advantages

The BLOW UTP patchcord delivers reliable unshielded copper connectivity over a 15 metre length, allowing flexible placement of network equipment without additional joins. The pre-terminated RJ45 plug-to-plug design reduces installation time and ensures consistent contact at both ends. The cable's eight-conductor UTP construction supports typical Ethernet speeds and is suitable for structured cabling in small-to-medium local area networks.

Suitable for

• Patching between network switches and patch panels
• Connecting routers, modems and desktop network ports
• Linking wall outlets to active network devices in offices or homes
• Temporary or permanent workstation cabling for LAN setups

Key specifications

• Cable type: Unshielded twisted pair (UTP)
• Number of conductors: 8 (4 pairs)
• Connectors: RJ45 plug on both ends
• Length: 15 metres
• Usage: Copper Ethernet patch cord for LAN connections

How to use

Insert each RJ45 plug into the corresponding Ethernet port on the devices to be connected until the plug clicks into place. For best performance, avoid tight bends, kinks or heavy compression along the cable run and maintain separation from strong electrical sources to reduce interference. Verify link/activity lights on connected equipment to confirm the physical connection and speed negotiation. If needed, replace the patchcord with a shorter or longer length to optimise cable routing and reduce excess slack.

Usage recommendations

For reliable network operation, route the cable through cable managers or along cable trays in office installations, avoid running parallel to power lines, and keep bend radius above the manufacturer's minimum (generally several times the cable diameter). Use the 15 m length where a single continuous patch lead is required between devices; select a different length for wall-mounted or concealed runs to prevent strain on connectors.