Fibre optic cable BlueOptics 040402G5120000050M 50 m 2x LC LC/APC

The BlueOptics 040402G5120000050M is a 50 m single-mode fibre optic patch cable with two LC connectors in an LC–LC/APC configuration and G.657.A1 fibre type. Designed for full-duplex communication, the cable uses a 9 µm core diameter single-mode fibre and a flame-retardant LSZH outer sheath. It is intended for reliable connections between patch panels, optical transceivers and other network equipment requiring low attenuation and high return loss.

Advantages

This BlueOptics patch cable uses laser-optimized G.657.A1 single-mode fibre for low attenuation per kilometre and high return loss suitable for long-reach and local optical links. Connectors and fibre components are manufactured to industry standards and the cable is tested with interferometer and OTDR, with measurement protocols for input loss and return loss supplied. The LSZH sheathing reduces halogen release and smoke in case of fire while maintaining flexibility for routing in racks and conduits.

Suitable for

• Interconnecting patch panels and optical distribution frames
• Connecting optical transceivers to network ports
• Single-mode LAN, WAN and data centre links
• Indoor installations demanding low-smoke, zero-halogen cabling

Key specifications

• Length: 50 m
• Fibre type: G.657.A1 single-mode (laser-optimized)
• Core diameter: 9 µm
• Connector type: 2× LC to LC (LC/LC APC compatible configuration)
• Duplex capability: full duplex
• Sheath: LSZH (flame-retardant, low smoke, zero halogen)
• Tested with: interferometer and OTDR; supplied with input loss and return loss measurement protocol
• Compliance: manufactured to common industrial standards and Telcordia GR-326-Core 4.4 requirements

How to use

Route the 50 m BlueOptics LC–LC patch cable between the two optical ports to be linked, avoiding sharp bends and tight bundling that exceed the fibre minimum bend radius. Clean connector endfaces before mating to ensure low insertion loss and optimal return loss. Insert LC connectors into the transceiver or patch panel ports until they click into place; to disconnect, depress the latch and pull straight out. Store unused cable loosely coiled to prevent microbends and physical stress.

Usage recommendations

Prior to installation, verify connector polish type and port compatibility (APC vs UPC) and confirm that endpoints expect single-mode G.657.A1 fibre. When routing through trays or conduits, maintain the manufacturer’s recommended minimum bend radius and protect terminations from dust and mechanical strain. Use cleaning tools and test equipment to confirm insertion loss and return loss after installation.