Network Cable BlueOptics 6XV1843-5FH300-0AA0 LC-LC Multimode Patch Cable 30m

The BlueOptics 6XV1843-5FH300-0AA0 LC-LC Multimode Patch Cable 30m is a multimode fiber optic cable designed for reliable short- to medium-range data connections. With LC connectors on both ends and a 30-metre length, this patch cable is intended for structured cabling in data centers, server rooms and office networks where consistent optical performance and low insertion loss are required. The cable construction emphasizes durability and stable signal transmission for high-speed networking tasks.

Advantages

This LC-LC multimode patch cable delivers predictable optical performance with low attenuation across the link and secure connector terminations to reduce back reflections. The 30 m length provides flexibility for rack-to-rack or room-to-room connections without additional splices. Designed for professional installations, the cable’s outer jacket and connector strain relief protect the fiber from mechanical stress and support long-term reliability in managed network environments.

Suitable for

• Interconnects between network switches and patch panels in data centers
• Connections between servers and storage equipment within the same technical room
• Horizontal cabling runs in office or telecommunications rooms
• Laboratory or testing setups requiring repeatable multimode fiber links

Key specifications

• Connector type: LC on both ends (duplex)
• Fiber type: multimode fiber
• Length: 30 metres
• Usage: patch cable for optical data transmission
• Typical features: low insertion loss, factory-terminated connectors, strain relief

How to use

Route the cable along the planned pathway, avoiding tight bends and areas with potential mechanical stress. Insert each LC connector into the corresponding LC port on network devices or patch panels until the connector latch clicks. Verify correct polarity if using duplex links, and secure excess cable with appropriate cable management to maintain bend radius. After installation, test the optical link with suitable equipment to confirm signal levels and link integrity.

Usage recommendations

Maintain the manufacturer’s recommended minimum bend radius and protect connector endfaces from dust and contamination; use dust caps when connectors are not mated. For best performance in multimode networks, match the fiber type and transceiver specifications and perform optical testing after installation to ensure compliance with network requirements.