The BlueOptics SFP6141FU1MKB InfiniBand fibre optic cable is a 1 m MTP to 4x LC breakout cable designed for high-speed multimode OM4 networks. It features a single MTP/UPC connector to four LC/UPC duplex connectors, 8 optical cores with G50/125 µm fiber, and an LSZH (Low Smoke Zero Halogen) outer sheath. Engineered for 850 nm transmission, the cable is intended for short-reach, high-density environments such as data centres, storage area networks and server interconnects where reliable, low-loss optical lanes are required.
Advantages
This MTP to 4x LC breakout cable provides a compact, factory-terminated alternative to splicing, enabling fast installation and straightforward deployment without special tools or onsite assembly. The OM4 multimode fiber and precision ceramic ferrules yield low insertion loss and high return loss values, supporting consistent signal quality. The LSZH jacket reduces smoke and toxic gas emissions in case of fire, aligning with industry safety norms. Each cable is quality-tested (including interferometer and OTDR checks) and delivered with measured insertion loss and return loss data.
Suitable for
- High-density data centre trunking and patching
- InfiniBand and Ethernet server-to-switch connections
- Storage area network (SAN) interconnects
- MTP cassette and MPO panel connections
- Short-reach multimode OM4 links (850 nm)
Key specifications
- Connector configuration: 1x MTP/UPC to 4x LC/UPC duplex
- Fiber type: Multimode OM4 (G50/125 µm)
- Number of cores: 8
- Length: 1 metre
- Wavelength: designed for 850 nm transmission
- Sheath material: LSZH (Low Smoke Zero Halogen), flame-retardant
- Typical use: short-reach, high-density applications
How to use
Connect the MTP end to the corresponding MTP port on a cassette, module or trunk cable and route each LC duplex connector to the target LC ports on switches, transceivers or patch panels. Ensure connectors are clean and free of dust or debris before mating to minimise insertion loss. Avoid tight bends and secure the cable to rack management hardware to prevent strain; the compact breakout design simplifies routing in high-density panels and reduces the need for splicing or field termination.
Usage recommendations
For best performance, use with OM4-compatible transceivers and MTP cassettes, follow manufacturer cleaning and handling procedures for UPC ferrules, and store or route the cable to maintain minimum bend radius. Verify insertion loss values provided with the product and perform end-to-end testing after installation when integrating into critical networks.
