BlueOptics optical fiber trunk cable OM4 MPO/UPC — UACC-OFC-MA-MPMP-2M 2 m LSZH

BlueOptics UACC-OFC-MA-MPMP-2M is a 2 m OM4 multimode optical fiber trunk cable terminated with MPO/UPC connectors and fitted with a low-smoke zero-halogen (LSZH) jacket. It is built for short-range, high-density interconnects in data centers and enterprise network backbones where parallel optics and multichannel transmission are required. The OM4 multimode fiber provides higher bandwidth and lower attenuation compared with lower-grade multimode fibers, making this trunk cable suitable for modern short-reach links and breakout assemblies.

Advantages

The cable combines MPO/UPC multi-fiber connectivity with an OM4 multimode core to support parallel optical transceivers and high aggregate data rates. The 2 m length is convenient for rack-to-rack or chassis-to-chassis patching in high-density environments, while the LSZH jacket reduces toxic smoke emissions in case of fire and meets safety requirements for many indoor installations. Connector polishing and alignment are designed to provide stable optical performance and low insertion loss for multimode short-reach applications.

Suitable for

• Data center trunking and high-density patch panels
• Parallel optics and MPO-based transceiver connections (short-reach)
• Enterprise backbone links within racks and between adjacent cabinets
• Breakout assemblies when used with MPO-to-LC/SC harnesses or cassettes

When it may not be suitable

This OM4 multimode MPO trunk cable is not intended for long-haul singlemode transmission; it is optimized for short-range multimode environments. It may not be compatible with installations that require different connector polish types, e.g. APC, or with systems that mandate singlemode fiber and corresponding transceivers.

Key specifications

• Fiber type: OM4 multimode
• Connector type: MPO/UPC to MPO/UPC (multi-fiber)
• Length: 2 m
• Jacket material: LSZH (low-smoke zero-halogen)
• Typical use: short-reach parallel multimode links and trunking

How to use

Install the BlueOptics OM4 MPO trunk cable by aligning MPO connectors with the corresponding MPO ports on transceivers, patch panels, or cassettes, ensuring correct orientation and secure latching. For breakout or patching to LC/SC ports, use compatible MPO-to-LC/SC harnesses or cassette modules designed for OM4 multimode. Avoid sharp bends and maintain the manufacturer-recommended minimum bend radius; route the cable within cable management trays or panels to prevent stress. Verify link performance with appropriate multimode optical test equipment after installation.

What to consider before purchase

• Confirm that your transceivers and equipment support OM4 multimode fiber and MPO/UPC connectors.
• Ensure 2 m length matches your rack layout and patching requirements to avoid excess slack or tension.
• Check that LSZH jacket material meets local fire safety and building code requirements.

Usage recommendations

Use this trunk cable for short-distance, high-density MPO deployments in data centers and enterprise closets; pair with compatible MPO transceivers and OM4-rated breakout modules, and perform end-to-end testing to confirm insertion loss and channel performance before placing links into production.