Bradas 3-way brass manifold GZ 3/4" for plumbing and irrigation systems

Bradas 3-way brass manifold GZ 3/4" for plumbing and irrigation systems is a compact, metal distribution fitting intended to combine or split water flows in residential and light commercial installations. Made from brass, the three-branch design with GZ 3/4" threaded connections provides a durable, corrosion-resistant junction for heating circuits, potable water lines and irrigation manifolds where reliable fluid routing is required.

Advantages

The brass construction offers good mechanical strength and resistance to corrosion, ensuring long service life in wet environments. The 3-way configuration simplifies pipework by enabling one inlet to feed two outlets or vice versa while maintaining threaded GZ 3/4" compatibility with commonly used plumbing fittings. Its compact form factor facilitates installation in limited spaces and reduces the need for additional adapters or complicated layouts.

Suitable for

• Domestic heating loop distribution and branch connections
• Potable water supply manifolds in kitchens and bathrooms
• Irrigation and garden watering systems requiring multiple outlets
• General pipework where a compact, threaded 3-way brass junction is needed

Key specifications

• Material: brass for corrosion resistance and mechanical durability
• Connection type: GZ 3/4" threaded ports (three-way configuration)
• Application temperature: suitable for typical domestic hot and cold water and heating systems
• Design: compact three-branch manifold for space-efficient installations

How to use

Install the manifold into the piping layout using appropriate sealing tape or joint compound on the GZ 3/4" threads to ensure leak-free connections. Decide whether the fitting will be used to split a supply into two branches or combine two feeds into one discharge, then connect the inlet and outlet pipes accordingly. Tighten fittings with suitable tools to a firm, leak-proof fit without over-torquing, and verify system tightness before full operation.

Usage recommendations

Use compatible brass or stainless-steel fittings and apply thread sealant suitable for potable water if used on drinking water lines. Avoid excessive mechanical stress on the manifold by supporting connected pipes, and perform pressure testing after installation to check for leaks. For systems with aggressive water chemistry or exceptionally high temperatures, verify material compatibility before installation.