Networking cable BTR NETCOM Cat.6 AWG 26/7 S/FTP RJ-45 1m

The BTR NETCOM Cat.6 AWG 26/7 S/FTP RJ-45 networking cable (1 m) is a fully shielded patch cable designed for reliable high-speed data transmission in industrial and commercial networks. It features a PUR outer sheath for mechanical protection and one RJ45 and one RJ45‑IP67‑V6 shielded connector with a 1:1 pin assignment. The cable meets Class E performance requirements to ISO/IEC 11801 Ed.2.2:2011-09 and DIN EN 50173-1:2011-09. The standard delivery shows a yellow cable with a grey connector; cable colors may vary and other lengths are available.

Advantages

The S/FTP shielding and AWG 26/7 conductor construction provide good resistance to external electromagnetic interference and support consistent Cat.6 performance. The PUR sheath offers enhanced durability and oil and abrasion resistance compared with standard PVC. The inclusion of an RJ45‑IP67‑V6 connector on one end enables use in environments where a degree of ingress protection is needed while maintaining a standard RJ45 on the opposite end for compatibility.

Suitable for

• Industrial and factory network connections requiring shielded Cat.6 cabling
• Patching between network devices where one sealed/IP67-capable connector is required
• Short runs within server rooms, control cabinets, or machinery panels (1 m length)

Key specifications

• Cable type: Cat.6, S/FTP (shielded foil with braided drain)
• Conductor: AWG 26/7
• Connectors: 1 x RJ45 (shielded), 1 x RJ45‑IP67‑V6 (shielded)
• Pin assignment: 1:1
• Sheath material: PUR
• Standards: Class E to ISO/IEC 11801 Ed.2.2:2011-09, DIN EN 50173-1:2011-09
• Length: 1 m
• Color: yellow cable, grey connector (actual cable color may vary)
• Brand/MPN/EAN: BTR / 141N113K10010 / 4250184131311

How to use

Connect the RJ45 end to the network device with a standard RJ45 socket and insert the RJ45‑IP67‑V6 connector into the mating IP67-compatible port or adapter. Ensure connectors are fully seated and, where applicable, tighten any coupling or sealing elements on the IP67 connector to maintain ingress protection. Route the cable to avoid sharp bends, heat sources, and mechanical strain that could damage the PUR sheath or internal conductors.

Usage recommendations

For best performance, use this Cat.6 S/FTP cable for short patch runs up to 1 m within shielded network topologies and connect to properly grounded equipment to ensure the shielding is effective. Verify connector compatibility and, if extended environmental sealing is required, confirm mating interfaces support the RJ45‑IP67‑V6 specification.