Power inverter CARSPA CAR600U-122 12V to 230V 600W with USB output

CARSPA CAR600U-122 is a 12V DC to 230V AC power inverter with modified sine wave output and a built-in USB port (5V, 500 mA). It converts vehicle or battery 12V power to 230V to supply small household and portable devices with a continuous output of 600 W and peak output of 1,200 W. The compact and lightweight design makes the inverter suitable for use in cars, boats and off-grid setups where stable AC power for laptops, chargers, lights and similar appliances is required.

Advantages

The inverter features a compact, lightweight and efficient housing designed for reliable operation and easy use. It provides audible low-battery warning, automatic shutdown at low or high input voltage, overload shutdown and thermal protection. Additional protective functions include short-circuit protection, reverse polarity protection, soft-start and automatic restart. A DC cigarette-plug connector and cables are included for simple in-vehicle connection.

Suitable for

• Powering laptops and phone chargers while travelling
• Running small household appliances and lights up to 600 W
• Use in cars, boats and recreational vehicles
• Off-grid or temporary power where 230V AC is required

Key specifications

• Model: CARSPA CAR600U-122
• Input: 12 V DC
• Output: 230 V AC, modified sine wave
• Continuous power: 600 W; Peak (surge) power: 1,200 W
• Output frequency: 50/60 Hz ±3
• USB output: 5 V, 500 mA
• Dimensions: 235 × 102 × 55.5 mm (D × W × H)
• Weight: 835 g
• Certifications: CE-EMC/LVD, RoHS, E-mark

How to use

Connect the inverter to a 12 V DC source using the supplied DC cigarette-plug cable or direct battery terminals as appropriate. Place the unit on a stable, well-ventilated surface and avoid covering ventilation openings. Switch on the inverter and connect your 230 V AC device(s) to the output sockets. Use the USB port to charge small USB devices. If the inverter issues a low-battery alarm or shuts down automatically, disconnect non-essential loads and recharge or replace the battery before restarting.

Usage recommendations

To protect the battery and inverter, avoid continuous operation near the maximum rated load. Allow adequate ventilation, do not expose the unit to moisture, and observe the specified input voltage range (auto shutdown below 10.5 V and above 15 V). For devices with sensitive electronics or strict waveform requirements, consider using a pure sine wave inverter.