Technical hose T10, inner Ø 8.0 mm x wall 2.5 mm, length 80 m, polymer

Technical hose T10 with an inner diameter of 8.0 mm and a wall thickness of 2.5 mm supplied in an 80 m length. Manufactured from polymer materials, this continuous hose is designed for fluid transport in low-pressure technical applications, including drip irrigation feeders and pneumatic lines. Its lightweight and flexible construction enables easy handling, rolling and long runs across gardens, workshops or small commercial sites where a compact, durable feed line is required.

Advantages

The polymer construction provides good resistance to weathering, moisture and routine abrasion while remaining flexible at typical outdoor temperatures. The 2.5 mm wall offers mechanical strength for low-pressure use without compromising bending performance. Supplied as an 80 m continuous length, the hose reduces the need for multiple couplings or joins and allows uninterrupted runs for irrigation or technical installations. Its inner diameter of 8.0 mm supports steady flow rates for drip systems and small pneumatic setups.

Suitable for

• Drip irrigation lines and garden watering systems
• Low-pressure fluid transfer in workshops and small installations
• Pneumatic supply lines for low-pressure tools and equipment
• Temporary or permanent outdoor hose runs where flexibility is required

Key specifications

• Inner diameter: 8.0 mm
• Wall thickness: 2.5 mm
• Length: 80 m (continuous)
• Material: polymer (weather- and moisture-resistant)
• Application pressure range: suitable for low-pressure technical and irrigation use
• Flexibility: designed for easy bending and routing

How to use

Unroll the hose along the intended run, keeping the supply source and end-user connections accessible. Cut to length with a sharp utility knife or hose cutter to obtain clean ends. Fit appropriate connectors, barbed fittings or clamps sized for an 8.0 mm internal diameter. When used for drip irrigation, install emitters, drippers or micro-sprinklers at designed intervals and secure the hose to landscape staples or clips to prevent movement. For pneumatic applications, verify that operating pressures remain within the hose’s low-pressure rating and check all connections for tightness before pressurizing.

Usage recommendations

Store the hose coiled in a shaded, dry place away from direct sunlight when not in use to extend service life. Avoid sharp kinks and excessive stretching; use proper fittings and clamps to maintain seal integrity. Inspect the hose periodically for wear, cuts or hardening and replace sections showing damage. For prolonged outdoor exposure in extreme climates, consider additional UV protection or periodic replacement to maintain performance.