Garden hose quick connector with Stop function Cellfast 3/4" (model 51-625)

Cellfast garden hose quick connector with Stop function for 3/4" (19 mm) fittings provides a simple and reliable way to connect and disconnect hoses and watering accessories. The connector is intended for outdoor watering tasks such as lawn irrigation, sprinkler attachment, and temporary connection of watering tools. The integrated Stop function automatically cuts off the water flow when the accessory is removed, preventing unwanted drainage of the hose and making accessory changes faster and neater.

Advantages

This quick connector offers fast, tool-free connection and disconnection while maintaining a watertight seal. The Stop function enhances convenience by closing the flow automatically on detachment, which saves time and reduces water spillage. The design is compatible with standard 3/4" (19 mm) hose fittings and is suitable for frequent use in garden irrigation systems. Materials and connection geometry are designed to ensure reliable performance and reduce the risk of leaks at the joint.

Suitable for

• Connecting garden hoses to sprinklers and rotary or oscillating heads
• Quick attachment of watering wands, spray guns and foamers
• Temporary connections for pressure washers or rinse hoses (where 3/4" fittings are used)
• Sections of garden irrigation systems requiring fast change of accessories without draining the line

Key specifications

• Compatibility: designed for 3/4" (19 mm) hose fittings
• Function: integrated Stop valve closes water flow upon detachment
• Connection type: quick-release coupling for tool-free operation
• Application: outdoor garden irrigation and hose accessory attachment
• Seal type: watertight sealing to minimise leaks at the joint

How to use

Attach the quick connector to the hose end by pushing or screwing it onto the 3/4" (19 mm) fitting as appropriate for your hose type, ensuring a tight fit. To connect an accessory, insert the accessory’s matching male coupling into the quick connector until it locks in place; water will flow normally while the accessory is attached. When you need to change or remove the accessory, pull back the outer sleeve or release mechanism and withdraw the accessory; the Stop function will close the internal valve and stop the water flow, preventing the hose from draining.

Usage recommendations

Check compatibility of hose and accessory fittings before use and inspect seals periodically for wear. Avoid exposing the connector to prolonged freezing conditions while water is trapped inside; drain the system or detach the connector in cold weather to prevent damage. Clean and rinse the connector occasionally to remove dirt and debris that could compromise the seal.