CERESIT CE60/43 Bahama is a 2 kg cement-based tile grout formulated for filling joints between ceramic, porcelain and natural stone tiles. Designed for both floor and wall applications, this grout provides a consistent Bahama color, smooth workability and a durable finish that helps resist everyday wear. It is suitable for indoor and outdoor tiling where a cementitious grout is required to seal seams and reduce moisture penetration.
Advantages
The cementitious composition offers good adhesion to common tile types and stable color after curing. The ready-to-mix powder yields a smooth mortar that is easy to apply and compact into joints. Once cured, the grout provides a hard, wear-resistant surface that supports regular cleaning and traffic on tiled floors. The product is supplied in a 2 kg pack suitable for small to medium repair or finishing jobs.
Suitable for
- Filling joints between ceramic wall and floor tiles
- Grouting porcelain and glazed tiles
- Use with natural stone tiles where cement grout is specified
- Indoor rooms such as kitchens, bathrooms and corridors
- Outdoor tiled areas not exposed to constant water immersion
When it may not be suitable
This cement-based grout is not intended for use in permanently wet environments or areas subject to chemical exposure unless additional protective sealing is applied. It may not be the best choice for very narrow joints below the manufacturer’s recommended width, or where a flexible, epoxy-based grout is required for high movement areas.
Key specifications
- Formulation: cement-based powder
- Pack size: 2 kg
- Color: Bahama (consistent color after mixing and curing)
- Application: joints between ceramic, porcelain and natural stone tiles
- Suitable surfaces: interior and exterior tiled walls and floors (non-immersed)
- Finish: hard, wear-resistant surface after curing
How to use
Mix the powder with clean water according to the manufacturer’s instructions until a homogeneous, lump-free mortar is obtained. Apply the grout with a rubber float or suitable tool, pressing the material firmly into joints and removing excess grout from the tile surface. Allow the grout to stiffen slightly, then clean the tile faces with a damp sponge, taking care not to wash out the joint. After initial curing, perform a final cleaning to remove haze. Follow recommended curing times before exposing the surface to heavy traffic or moisture.
What to consider before purchase
- Confirm the joint width and depth to estimate material quantity.
- Ensure the Bahama color matches your tiles and sample-test on a small area if required.
- Check whether a cement-based grout is appropriate for the installation environment (immersion, chemical exposure, high movement).
- Plan for additional sealant if using on porous natural stone or in outdoor exposed areas.
Usage recommendations
Store the product in a dry place and protect from frost. Use within the shelf life indicated on the packaging, and follow all safety instructions on the label. For best results, use clean tools and water, and avoid applying grout at extreme temperatures.
