Grout CERESIT CE60/10 2 kg — color Manhattan (192)

CERESIT CE60/10 grout in a 2 kg package, color Manhattan (192), is a cement-based tile grout formulated for filling and finishing joints between ceramic, porcelain and natural stone tiles. The product is supplied in a ready-to-mix powder that, when combined with water according to manufacturer instructions, produces a smooth, consistent grout suitable for interior and exterior wall and floor applications. The Manhattan shade is a neutral mid-tone designed to provide even seams and complement a range of tile surfaces.

Advantages

CERESIT CE60/10 delivers uniform color and a compact joint surface that resists general wear and contributes to improved moisture resistance compared with untreated gaps. Its cement-based composition provides good adhesion to common tile materials and allows for both vertical and horizontal applications. Packaged in a 2 kg size, it is convenient for small tiling jobs and repairs where color matching is required.

Suitable for

• Filling joints between ceramic floor and wall tiles
• Grouting porcelain and vitrified tiles
• Finishing joints around natural stone tiles with appropriate sealer after curing
• Interior wet areas such as bathrooms and kitchens (following drying and sealing guidance)
• Exterior wall and floor tiling where cement-based grout is specified

When it may not be suitable

This cement-based grout is not intended for continuous submersion or for joints that require high chemical resistance; in such cases, epoxy or specialized grouts are more appropriate. Very narrow or extremely wide joints beyond the product's recommended joint width should use a grout grade specifically formulated for those dimensions.

Key specifications

• Form: cementitious powder to be mixed with water
• Net weight: 2 kg
• Color: Manhattan (neutral mid-tone)
• Intended tile types: ceramic, porcelain, natural stone (subject to sealing)
• Application locations: interior and exterior walls and floors
• Performance: improved moisture resistance compared with ungrouted joints

How to use

Prepare a clean, dry joint free of dust, debris and any uncured adhesive. Mix the grout powder with water following the manufacturer's proportion recommendations until a homogeneous, lump-free consistency is achieved. Apply the grout with a rubber float, pressing it into the joints at a low angle to ensure full filling. Remove excess grout from tile faces with the float and, after initial set, finish the joints with a damp sponge to smooth the surface and remove residues. Allow the grout to cure fully before exposing to traffic or moisture, and follow any sealing instructions for natural stone installations.

What to consider before purchase

• Confirm the Manhattan color (192) matches or complements your tile and other finishes
• Ensure the 2 kg package size is sufficient for the total joint area and joint width
• Verify recommended joint width and substrate conditions for cementitious grout
• Plan for sealing if used with porous natural stone to protect against staining

Usage recommendations

Work in small sections to prevent premature setting during application; maintain recommended mixing ratios and curing times for best color uniformity and joint strength.