Network cable CORDIAL 15579 Cat7a S/FTP (S-STP) RJ-45 to RJ-45, 3 m, Black

The CORDIAL CSE HH 7A PUR data patch cable combines CCAT 7A PUR bulk cable with HIROSE® RJ45 connectors to provide a robust 3 m Cat7a S/FTP patch lead in black. Designed for high-performance network environments, the double S/FTP shielding supports data class CAT 7A with a bandwidth up to 1000 MHz (1 GHz), while the PUR outer jacket increases resistance to abrasion, oil, microbes and chemicals for reliable mobile indoor and outdoor use.

Advantages

The cable features a flexible AWG 26/7 conductor assembly for easy routing and reliable device connections, making it well suited for patching and short interconnects. Its PUR jacket offers enhanced mechanical protection and reelability for stage and mobile applications. The S/FTP shielding and CAT 7A specification enable high-frequency signal transmission, and the cable supports Power over Ethernet (PoE) per IEEE 802.3af-2003 with up to 15.4 W, extending its applicability for powered devices.

Suitable for

• Audio network links and EtherSound™ systems
• Lighting control networks and stage patching
• High-performance LAN patch connections up to 1 GHz
• Mobile and outdoor patching where abrasion and chemical resistance are required

Когда это может не подойти

The cable is optimized for short patch and device connections (typical use 3 m); it is not intended as a permanent in-wall installation or long-haul trunk cable where different fire-rating or installation standards may be required. For PoE applications, the supported standard is IEEE 802.3af-2003 (15.4 W); higher-power PoE standards (e.g., PoE+ or PoE++ ) are not supported by this specification.

Key specifications

• Length: 3 m
• Cable category: Cat7a (data class CAT 7A)
• Shielding: S/FTP (overall braid with individually shielded pairs)
• Bandwidth: up to 1000 MHz (1 GHz)
• Conductor: flexible AWG 26/7 (7 strands per conductor)
• Connectors: RJ-45 straight male — both ends
• Jacket material: PUR (abrasion-, oil- and chemical-resistant)
• PoE support: IEEE 802.3af-2003, up to 15.4 W (typical max channel distance 70 m for that power level)
• Flame retardancy: meets UL 1581 §1090/§1100 (FT2) and IEC 60332-1-2
• Halogen-free: meets EN 50267-2-1 and IEC 60754-1
• Colour: Black

How to use

Connect the RJ45 straight male plugs to the corresponding RJ45 ports on devices or patch panels. Route the 3 m cable to avoid sharp bends and mechanical pinching; the flexible AWG 26/7 conductors allow neat routing in patch bays and behind equipment. For mobile or outdoor use, secure the cable to prevent excessive abrasion and exposure to extreme mechanical stress. When delivering power via PoE, ensure connected devices and switches comply with IEEE 802.3af and observe distance limitations for reliable power delivery.

What to consider before purchase

• Intended length: 3 m — verify this suits your patching needs
• PoE power level required: supports up to IEEE 802.3af (15.4 W) only
• Installation environment: PUR jacket suits mobile and outdoor use but is not a substitute for certified in-wall or conduit-rated cable
• Compatibility: RJ45 connectors on both ends — ensure device ports match

Usage recommendations

Use this Cat7a S/FTP PUR-jacket patch cable for short, high-frequency network connections in audio, lighting control and mobile staging applications; avoid using it as permanent in-wall cabling and do not rely on it for PoE standards above IEEE 802.3af.