PoE adapter Cudy POE10 Gigabit Ethernet, 22W output, 10/100/1000 Mbps, white, max 100 m

Cudy POE10 is a compact Gigabit Ethernet PoE adapter that provides up to 22 W output power per port and supports data rates of 10/100/1000 Mbps over standard Ethernet cabling. The white, wall-mountable unit extends PoE and Ethernet reach by up to 100 m and includes activity, link and PoE LEDs for simple status monitoring. It is designed to power PoE-capable devices such as IP cameras, wireless access points and VoIP phones without requiring an external power supply.

Advantages

The adapter supports IEEE 802.3af and IEEE 802.3at auto-sensing, delivering the appropriate wattage for PoE and PoE+ devices while protecting connected equipment from incorrect installation. Gigabit ports ensure full-rate network performance across the extended distance. The plug-and-play design requires no configuration, and the compact wall-mountable housing simplifies installation and saves space.

Suitable for

• Powering IP surveillance cameras where an additional PoE reach is needed
• Supplying PoE to wireless access points in installations with limited power outlets
• Providing PoE to VoIP phones in office or remote locations
• Extending Ethernet and PoE connectivity up to 100 m from the network switch

Key specifications

• Output power: up to 22 W per port
• Ethernet data rates: 10/100/1000 Mbps (Gigabit)
• PoE standards supported: IEEE 802.3af and IEEE 802.3at (auto-sensing)
• Maximum extension distance: up to 100 m
• Port configuration: one PoE input port and one PoE output port, both 10/100/1000 Mbps
• Pin assignment and polarity: Input 1/2(-), 3/6(+), 4/5(+), 7/8(-); Output 1/2(-), 3/6(+)
• LED indicators: Activity, Link, PoE
• Color and form factor: white, compact wall-mountable unit

How to use

Connect a PoE-enabled switch or injector to the adapter's PoE input port using Cat5 or higher-rated Ethernet cabling, and connect the PoE output port to the powered device (IP camera, access point, or VoIP phone). Ensure total cable run length does not exceed 100 m for reliable data and power delivery. The adapter is plug-and-play and requires no software configuration; LEDs indicate link, activity and PoE status during operation.

Usage recommendations

Use Cat5e or higher-quality cabling to maintain Gigabit throughput and minimise power loss. Verify that the connected power source (switch or injector) can supply sufficient total wattage for downstream devices considering the adapter provides up to 22 W per port. Install the adapter in a dry, ventilated location and mount it securely to a wall to avoid strain on cable connections.