Network switch D-Link IGS-1000-4UP2X — 4 × 2.5G RJ-45, 2 × SFP+, PoE, aluminium/blue

The D-Link IGS-1000-4UP2X is an unmanaged network switch offering four 2.5G RJ-45 ports (100/1000/2500) and two SFP+ uplink slots. It supports Power over Ethernet (IEEE 802.3af/at/bt) with per-port PoE up to 95 W and an overall PoE budget suitable for powering demanding devices. The switch provides a 60 Gbit/s switching capacity and a 4,000-entry MAC table in a wall-mountable aluminium and blue housing designed for small offices, edge deployments and environments where a compact, plug-and-play solution is required.

Advantages

The IGS-1000-4UP2X combines multi-gigabit copper ports and 10G-capable SFP+ fiber uplinks to enable high-throughput uplink connections and flexible network extension over fiber. Built-in IEEE 802.3bt PoE++ support allows delivery of high power over existing Cat5e/6 cabling, making it possible to power PTZ cameras, all-in-one terminals and other high-power edge devices without additional power adapters. The aluminium housing with energy-efficient Ethernet support and a 60 Gbit/s non-blocking fabric ensures consistent wire-speed performance and quiet, fanless operation suitable for a variety of deployment locations.

Suitable for

• Small offices and branch network edge deployments
• Wireless access point aggregation for 802.11ax/be networks
• PoE-powered surveillance and PTZ camera installations
• Remote digital signage, POS terminals and kiosks
• Industrial or outdoor cabinet installations with fiber uplinks

Key specifications

• Ports: 4 × 2.5G RJ-45 (100/1000/2500) copper ports; 2 × SFP+ slots supporting 10G (also compatible with lower-rate SFP modules)
• PoE: IEEE 802.3af/at/bt support; per-port power up to 95 W; combined PoE budget up to 360 W (LED indicators for power usage levels)
• Switching performance: 60 Gbit/s switching capacity; 4,000 MAC address table entries; store-and-forward switching
• Network standards: IEEE 802.3, 802.3u, 802.3ab, 802.3bz, 802.3x, 802.3ae, 802.3az, 802.1p
• Protection: ESD protection (±4 kV contact, ±8 kV air); surge immunity up to ±5 kV
• Power input and redundancy: 48–54 V DC dual power input with reverse polarity protection and hardware failover
• Environmental: IP30 metal housing (aluminium), fanless design, operating temperature range –40 °C to 75 °C
• Form factor: Wall-mountable (DIN-rail compatible designs available), compact industrial metal case

How to use

Install the switch on a wall or DIN-rail in an appropriate enclosure and connect power to the dual DC inputs using 48–54 V DC supplies. Plug network devices into the 2.5G RJ-45 ports and insert SFP/SFP+ transceivers in the uplink slots as required for fiber connections. If using PoE devices, connect Cat5e/6 cables to the PoE-capable ports; the switch will auto-detect powered devices and supply power according to the IEEE standards supported. No configuration is required for basic operation; the device works as a plug-and-play unmanaged switch, providing automatic address learning, flow control and wire-speed forwarding.

Usage recommendations

To maximize reliability, use quality Cat5e/Cat6 cabling for 2.5G and PoE connections and certified SFP/SFP+ transceivers for fiber uplinks. Provide redundant DC power sources where high availability is required and monitor PoE load indicators to avoid exceeding the unit's combined power budget. Place the switch in a ventilated, dust-free location within its operating temperature range to maintain long-term stable operation.