Electric underfloor heating set DANFOSS DEVI Thin Bed Set 1‑1500W 10 m² with DEVIreg Touch thermostat (MPN 140F0828)

The DANFOSS DEVI Thin Bed Set 1-1500W 10 m² with DEVIreg Touch thermostat is a complete electric underfloor heating solution for tiled floors and thin-bed installations in rooms up to 10 m². The set pairs a pre-sized heating cable mat that delivers 1500 W with a programmable DEVIreg Touch thermostat for stable temperature control. The system is intended to be embedded in thin mortar or tile adhesive layers to provide even, consistent radiant warmth under ceramic, stone or similar floor coverings.

Advantages

This ready-to-install kit offers uniform heat distribution across the covered floor area and a compact profile suitable for thin-bed applications. The inclusion of the DEVIreg Touch thermostat provides programmable control, clear touchscreen operation and the ability to set temperature schedules for energy-efficient operation. The heating mat reduces installation time compared with loose cable layouts, and the system is compatible with common tiled finishes, ensuring predictable performance when installed according to manufacturer guidance.

Suitable for

• Small bathrooms up to 10 m²
• Kitchen areas with tiled floors
• Renovations with thin-bed tile adhesive
• Rooms requiring discreet, underfloor radiant heating

Key specifications

• Nominal output: 1500 W distributed over 10 m²
• Coverage area: up to 10 m²
• Heating element format: pre-attached cable mat for thin-bed installation
• Control: DEVIreg Touch programmable thermostat with touchscreen interface
• Installation method: embedded in thin mortar or tile adhesive beneath tiled surfaces

How to use

Prepare the substrate according to tile and thin-bed mortar manufacturer instructions, ensuring a clean, level and stable base. Roll out the heating mat and fix it in place, avoiding overlaps and sharp bends. Embed the mat within the thin mortar or tile adhesive layer and install the floor covering once the adhesive has set. Mount the DEVIreg Touch thermostat on the wall, perform electrical connections and configure the temperature and scheduling functions following the supplied installation manual and local electrical regulations. A qualified electrician should carry out all wiring and final commissioning.

Usage recommendations

For reliable long-term performance, use compatible tile adhesives and follow the manufacturer’s instructions for embedding the heating mat. Verify that the total system load matches the available circuit capacity and protect the installation with suitable residual-current and overcurrent protection as required by local codes. Use the thermostat’s scheduling features to optimize energy use and avoid fitting heavy fixed furniture directly over heated areas to allow effective heat dissipation.