Underfloor heating mat DANFOSS 83030586 150 W/m² for 10.0 m²

DANFOSS underfloor heating thin mat model 83030586 delivers electric surface heating with a power density of 150 W/m² and is designed for coverage of 10.0 m². The heating mat is intended for installation beneath tile, stone or other suitable floor coverings to provide uniform, low-profile warmth across the floor surface. It is suitable for new-build and retrofit projects in rooms such as bathrooms, kitchens and utility areas where even heat distribution and a discreet installation are required.

Advantages

The thin construction allows installation directly below typical floor finishes without significantly raising floor height. With a rated output of 150 W/m² the mat provides effective, fast surface warming and can be paired with a compatible thermostat for temperature control and energy management. The product supports reliable heat distribution across the planned 10.0 m² area and is suitable for wet-room-compatible installations when used with appropriate substrates and finishes.

Suitable for

• Bathrooms and shower rooms
• Kitchens and utility rooms
• Renovations and retrofit installations
• New-build residential rooms requiring underfloor electric heating

Key specifications

• Heating type: electric thin mat for surface-mounted underfloor heating
• Power density: 150 W/m²
• Coverage area: 10.0 m²
• Installation: fixed mat to be laid beneath floor coverings (tiles, stone, compatible finishes)
• Floor buildup: low-profile design suitable for limited floor height increase

How to use

Prepare the subfloor according to the floor covering manufacturer’s instructions and ensure the surface is clean, dry and level. Plan the mat layout to cover the intended 10.0 m² area avoiding fixed fixtures and pipe runs. Fix the mat to the subfloor following the manufacturer’s installation guide, connect to a compatible thermostat and ensure electrical connections are carried out by a qualified electrician in compliance with local regulations. Test the circuit and thermostat function before applying the final floor covering and allow any recommended curing or leveling compounds to set fully.

Usage recommendations

Use a compatible floor temperature thermostat and, where applicable, a floor sensor to control surface temperature and improve energy efficiency. Verify that the chosen floor covering and adhesive are suitable for electric underfloor heating and follow all installation instructions and local electrical codes. For wet room installations, use appropriate waterproofing and substrate systems specified for underfloor heating.