Deante feather seal 5 mm for Funkia shower enclosure XKCP1UU52

Deante feather seal 5 mm for Funkia shower enclosure XKCP1UU52 is a replacement edge seal designed to fit between glass panels and frame in compatible Funkia shower cabins. The profile has a 5 mm thickness and is intended to reduce water leakage along the glass perimeter. This seal is suitable for repair or maintenance when original sealing elements show wear or damage, helping to restore the enclosure’s resistance to splashing and dripping.

Advantages

The feather-style profile provides a flexible contact surface that adapts to slight gaps and unevenness between glass and frame, promoting a tighter closure. Its 5 mm dimension matches common gap sizes on Funkia shower models that accept this type of seal. The product is simple to fit as a replacement part and is intended to work with the corresponding Funkia fittings to maintain the original enclosure function.

Suitable for

• Replacement of worn or damaged edge seals in Funkia shower enclosures that accept a 5 mm feather seal
• Domestic bathroom shower cabins where water leakage at the glass/frame interface needs reduction
• Maintenance tasks to restore proper sealing without replacing larger enclosure components

When it may not be suitable

This seal is specifically profiled for Funkia shower enclosures and matching fittings; it may not fit other brands or models with different groove shapes or larger gap sizes. If the enclosure has unusually wide gaps, damaged frame channels, or requires a different seal geometry, this 5 mm feather seal may not provide an effective solution.

Key specifications

• Profile type: feather (flexible edge seal)
• Thickness: 5 mm (profile contact dimension)
• Application: edge sealing between glass panel and frame in compatible shower enclosures
• Material characteristics: flexible sealing material suitable for wet-room conditions

How to use

Measure the gap and the existing seal profile to confirm compatibility with the 5 mm feather seal. Remove the old, worn seal from the glass or frame channel, clean the mounting groove and surrounding surfaces to remove dirt and residue, then press the new feather seal into place along the edge of the glass or into the frame channel. Ensure the seal sits evenly along the length and trim any excess to size with a sharp cutter. After installation, check for consistent contact and perform a water test to confirm reduced leakage.

What to consider before purchase

• Confirm that your Funkia shower enclosure accepts a 5 mm feather-style edge seal and that the groove shape matches this profile
• Verify the length required and whether trimming on-site is necessary
• Inspect the frame channel for damage that could prevent proper sealing even after replacement

Usage recommendations

For best results, install the seal on clean, dry surfaces and replace any severely corroded or bent frame components before fitting the new profile. Periodically inspect the seal for wear and replace when compression or cracking reduces effectiveness.