Cutting Line Dedra 2.0 mm × 15 m, square profile

Dedra cutting line 2.0 mm × 15 m with a square profile is a replacement trimmer line designed for garden string trimmers and brushcutters that accept 2.0 mm diameter line. The 15-meter spool provides enough length for multiple refills, and the square profile delivers a straight-edged cutting action that is effective for edging, lawn maintenance and light vegetation control around the home and in small gardens. The line is intended for manual winding into compatible trimmer heads and offers a balance between durability and flexibility for routine garden tasks.

Advantages

The square cross-section gives a clean, defined cut on grass and soft stems while maintaining contact strength to resist breakage during normal use. At 2.0 mm thickness the line is suitable for light to medium trimming tasks, offering improved resistance to wear compared with thinner lines. The 15 m length reduces the need for frequent replacements and simplifies spool preparation when performing maintenance on a trimmer.

Suitable for

• Edging along sidewalks and flowerbeds
• Lawn turf maintenance and trimming around obstacles
• Removing light weeds and soft-stemmed vegetation
• Home gardens and small allotments

Key specifications

• Line diameter: 2.0 mm
• Length: 15 m
• Profile: square
• Material: nylon-based trimmer line (standard for cutting lines)

How to use

Turn off the trimmer and disconnect power or remove the ignition source before replacing the line. Remove the trimmer head cover according to the tool manufacturer's instructions, wind the 2.0 mm line evenly onto the spool following the directional arrows if present, and secure the line ends in the spool notches. Reassemble the trimmer head, ensure line length is appropriate for the head type, and perform a short test cut in a safe area to confirm correct installation and balance.

Usage recommendations

For best results use this 2.0 mm square profile line in trimmers rated for 2.0 mm diameter lines. Avoid cutting large woody stems or thick brush to prevent premature wear or breakage. Regularly inspect the line for wear and replace the spool when the line becomes too short or shows signs of excessive fraying.