Networking Cable Dexlan 858712 5 m Cat6a S/FTP RJ-45

The Dexlan 858712 5 m Cat6a S/FTP RJ-45 networking cable provides a durable connection for high-speed wired networks. Constructed to Cat6a specifications, the cable supports 10 Gigabit Ethernet over short to moderate distances and includes S/FTP shielding to reduce electromagnetic and crosstalk interference. Both ends are fitted with standard RJ-45 plugs compatible with routers, switches, network interface cards and patch panels, making it suitable for structured cabling in home and office environments.

Advantages

The S/FTP (shielded foil with overall braid) construction combines individual pair foil shielding with an overall braided shield, improving noise immunity in electrically noisy environments. Cat6a specification ensures higher bandwidth and lower alien crosstalk compared with Cat6, while the 5 m length offers a balance between reach and signal integrity for typical desk-to-switch connections. Standard RJ-45 terminations provide plug-and-play compatibility with common networking equipment.

Suitable for

• Connecting computers, NAS devices, and servers to switches or routers in home and small office networks
• Patching between wall outlets and patch panels in structured cabling installations
• High-bandwidth applications such as 10 Gigabit Ethernet for local transfers and media streaming
• Environments with potential electromagnetic interference where shielded cabling is preferred

Key specifications

• Category: Cat6a performance class suitable for 10 Gbps over specified distances
• Shielding: S/FTP — individually shielded twisted pairs with overall braided shield
• Connector type: RJ-45 on both ends, 8P8C standard
• Length: 5 meters
• Cable conductor: stranded or solid copper conductor (check packaging for specific conductor type)
• Suitable frequency range: up to 500 MHz (Cat6a standard)
• Typical use: Ethernet networking, structured cabling, patching

How to use

Plug one RJ-45 connector into the network port of your device and the other into the corresponding port on a switch, router or wall outlet. Ensure connectors are fully inserted until the latch clicks to secure the connection. For structured installations, route the cable without tight bends and avoid running it parallel to power lines to minimize interference. If installing in permanent runs, verify whether solid or stranded conductor type matches patch panel and keystone jack requirements.

Usage recommendations

For best performance, avoid sharp bends and kinking; maintain a bend radius of at least four times the cable diameter. When used in environments with high electrical noise, ensure both ends are properly grounded through shielded equipment or connectors to take full advantage of the S/FTP shielding. Test links with a certified network tester after installation to confirm performance and continuity.