Wall-mounted enclosure DIGIT Dynamic-N DN-37112, 600×450 mm (WxD), unassembled

The DIGIT Dynamic-N DN-37112 wall-mounted enclosure provides a compact, protected housing for telecommunication and network equipment with an internal footprint of 600×450 mm (W×D). Supplied unassembled for space-efficient transport, the enclosure is designed for patch panels, switches and cable routing in server rooms, wiring closets and small office installations where wall mounting and optimized ventilation are important. Constructed from robust sheet steel with a lockable safety glass door in a steel frame, the cabinet includes adjustable 483 mm (19") profile rails front and rear, pre-punched cable inlets and provision for fan mounting to support both passive and active cooling.

Advantages

The unassembled delivery reduces transport volume and simplifies logistics while allowing quick on-site assembly. The enclosure combines sturdy steel construction with electrostatic powder coating for durable surface protection. Adjustable, galvanized 483 mm (19") profile rails at the front and rear enable flexible mounting of standard 19" devices, and the lockable safety glass door gives physical access control with visual monitoring of installed equipment. Multiple pre-punched cable entries and a roof area prepared for fan installation support organized cable management and improved airflow.

Suitable for

• Wall mounting of 19" patch panels, switches and small network devices
• Compact server closets and telecommunications cabinets in offices
• Distribution points and wiring closets for structured cabling
• Environments requiring space-saving wall installation with ventilation

Key specifications

• Internal footprint: 600 × 450 mm (width × depth)
• Construction material: sheet steel, 1.0–1.2 mm thickness
• Surface finish: electrostatic powder coating (standard colours grey RAL 7035 and black RAL 9005)
• Protection class: IP20
• Front door: lockable safety glass with steel frame, 230° opening angle, 1-point locking
• Mounting rails: two pairs of galvanized 483 mm (19") profile rails, front and rear, depth-adjustable and height-unit marked
• Installation depth for components (standard maximum): 219–320 mm
• Cable entry: pre-punched cut-outs at roof, rear and base
• Ventilation: ventilation slots and roof prepared for fan element (punched mounts)
• Earthing: four earthing points (base, side panel and front door) with protective caps

How to use

Unpack the flat-packed components and follow the enclosed installation instructions to assemble the cabinet. Fix the supplied mounting plate securely to the wall at the desired height, then hang and fasten the assembled enclosure onto the plate. Install the galvanized 19" profile rails at the required depth and mark positions using the height-unit labels. Mount patch panels, switches or other 19" devices onto the rails, route cables through the pre-punched entries in the roof, rear or base, and use the ventilation openings or install a fan in the prepared roof area if active cooling is required. Close and lock the front door after verifying all connections.

Usage recommendations

Ensure the wall and mounting hardware are rated for the combined weight of the assembled enclosure and installed equipment. Maintain clearances for airflow and allow access to the front and side panels for maintenance. Use appropriate cable management accessories and grounding practices when installing networking equipment.