Wall-mounted enclosure DIGIT Dynamic-N DN-37113, 600×450 mm (WxD), unassembled

Wall-mounted enclosure DIGIT Dynamic-N DN-37113, 600×450 mm (WxD), unassembled is a steel network cabinet designed to house telecommunications and networking equipment, patch panels or small server components. Supplied unassembled for space-efficient transport, the cabinet offers 19" mounting rails at the front and rear, pre-punched cable inlets in roof, rear and base, and provisions for ventilation and fan installation. The unit combines a lockable safety glass door with removable side panels and adjustable 19" rails to facilitate installation and maintenance in office or server room environments.

Advantages

The enclosure is manufactured from robust 1.0–1.2 mm sheet steel with electrostatic powder coating for durable surface protection. Two pairs of galvanized 483 mm (19") profile rails are fitted front and rear, are depth-adjustable and clearly marked with height units for easy mounting of standard 19" equipment. Ventilation slots and a roof cutout for a fan element support both passive and active cooling. Delivered unassembled, the cabinet reduces transport volume and can be assembled and wall-mounted quickly using the supplied mounting plate and instructions. A lockable safety glass door with steel frame and earthing points ensure secure operation and safe grounding.

Suitable for

• Small to medium network installations in offices and server rooms
• Mounting patch panels, switches and router equipment in 19" format
• Cable management and structured cabling termination
• Enclosures for edge or branch telecommunications cabinets

Key specifications

• External width × depth: 600 × 450 mm
• Mounting system: 483 mm (19") profile rails at front and rear, galvanized
• Material: 1.0–1.2 mm sheet steel, powder-coated
• Door: lockable safety glass door with steel frame, 230° opening angle, 1-point locking
• Protection class: IP20
• Installation depth for components (standard maximum): 219–320 mm
• Cable entry: pre-punched cut-outs in roof, rear and base
• Ventilation: ventilation slots and roof prepared for fan module
• Earthing: 4 earthing points with protective caps
• Delivery state: supplied unassembled (flat pack)

How to use

Unpack the flat-packed components and follow the enclosed assembly instructions to attach roof, base, rear panel and side panels. Install the supplied mounting plate on the wall at the desired height and secure the assembled housing to the plate. Fit the galvanized 19" profile rails at the required depth and mount networking equipment, patch panels or accessories onto the rails using standard 19" mounting hardware. Connect cables through the pre-punched cut-outs in the roof, base or rear, and use the ventilation openings or install a fan module in the prepared roof area if active cooling is required. Lock the safety glass door after installation and connect earthing points as part of the grounding procedure.

Usage recommendations

For reliable operation and safe installation, ensure the mounting plate is secured to a load-bearing wall structure and that the cabinet is earthed using the provided earthing points. Verify installation depth and clearance for installed equipment (219–320 mm) before mounting devices. Use the adjustable rails and cable entry points to maintain organized cable routing and allow adequate airflow; consider adding a fan module if densely packed equipment or higher heat dissipation is expected.