Wall-mounted network enclosure DIGIT Dynamic-N DN-37114 — 600×600 mm (W×D), unmounted

Wall-mounted network enclosure DIGIT Dynamic-N DN-37114 with internal dimensions 600×600 mm (W×D) is a compact, unmounted cabinet designed for telecommunications and network equipment. Supplied as a flat pack for optimized transport, the enclosure accommodates patch panels, switches and small servers in offices, server rooms and telecom closets. The cabinet is made of robust sheet steel with electrostatic powder coating and features adjustable 483 mm (19") profile rails at front and rear, pre-punched cable inlets and ventilation provisions to support both passive and active cooling.

Advantages

The unassembled delivery reduces shipping volume and allows for flexible on-site assembly. A lockable safety glass door with steel frame and removable side panels improve accessibility while providing visual control of installed equipment. Galvanized 19" rails, labelled in height units and adjustable in depth, make mounting standard rack components straightforward. Pre-punched cable entries on the roof, rear and base and a roof chassis prepared for a fan module simplify cable management and ventilation upgrades.

Suitable for

• Small to medium network installations in offices and branch sites
• Patch panels, switches and compact server modules
• Telecom closets and wall-mounted rack requirements where space is limited
• Environments requiring lockable, visible front access for monitoring

Key specifications

• Internal dimensions (W×D): 600 × 600 mm
• Mounting: wall-mounted with included mounting plate
• Rack standard: 483 mm (19") profile rails at front and rear, galvanized
• Rail adjustability: depth-adjustable profile rails marked with height units
• Material: 1.0–1.2 mm sheet steel, powder-coated (standard colors grey RAL 7035 or black RAL 9005)
• Protection class: IP20
• Door: lockable safety glass door with steel frame, removable, 230° opening angle, 1-point locking
• Ventilation: ventilation slots and roof prepared for fan module
• Cable entry: pre-punched cut-outs at roof, rear and base
• Earthing: 4 earthing points with protective caps
• Installation depth for components (standard maximum): 369–470 mm

How to use

Assemble the cabinet on a stable surface following the enclosed installation instructions. First screw the supplied mounting plate securely into the wall at the required height, taking into account the installation depth of equipment. Complete the cabinet assembly, adjust the front and rear 19" profile rails to the correct depth and mount patch panels, switches or other 19" compatible devices. Use the pre-punched cut-outs for structured cable entry and route cables through the roof, rear or base openings. If active cooling is required, install a compatible fan module in the prepared roof area and verify ventilation slots are unobstructed. Finally, close and lock the safety glass door and attach side panels as needed.

Usage recommendations

For stable operation, attach the mounting plate to suitable wall anchors or studs rated for the combined weight of the cabinet and installed equipment. Distribute mounted devices to keep the centre of gravity close to the wall and maintain recommended installation depth (369–470 mm) for connected components. Use the labelled height units on the rails for precise U-spacing when mounting equipment and ensure earthing points are connected during installation. When installing active cooling, verify airflow paths are clear and follow the fan manufacturer's instructions for electrical connections.