Wall-mounted enclosure DIGIT Dynamic-N DN-37115 — 600×600 mm (W×D), unmounted

Wall-mounted enclosure DIGIT Dynamic-N DN-37115 — 600×600 mm (W×D), unmounted is a steel network cabinet designed for housing telecommunication and network equipment in server rooms, communication cabinets and office racks. Supplied unassembled to optimise transport and storage, the cabinet provides adjustable 19" rails at front and rear, pre-punched cable inlets in roof, base and rear, ventilation slots and a roof prepared for a fan module. The front is equipped with a lockable safety glass door in a steel frame and removable side panels for straightforward access during installation and maintenance.

Advantages

The DN-37115 combines robust construction with space-saving delivery: up to 1.2 mm sheet steel and electrostatic powder coating ensure high load-bearing capacity and corrosion protection while the flat-pack unassembled delivery reduces shipping volume and cost. Adjustable, galvanized 483 mm (19") profile rails marked with height units make mounting of active and passive network components flexible and clear. Pre-punched cable entries and a roof prepared for fan installation support effective cable management and airflow optimisation. Lockable safety glass door, removable panels and multiple earthing points provide secure installation and convenient access.

Suitable for

• Installation of 19" network switches, patch panels and patch cords
• Housing small servers, UPS modules and active network devices in comms rooms
• Wall-mounted IT infrastructure in offices, retail outlets and technical rooms
• Cable management and consolidation of passive components in network closets

Key specifications

• Internal width × depth: 600 × 600 mm
• Mounting system: 483 mm (19") profile rails at front and rear, galvanized, depth-adjustable and labelled with height units
• Material thickness: sheet steel 1.0–1.2 mm with powder-coated finish (standard grey RAL 7035 or black RAL 9005)
• Door: lockable safety glass door with steel frame, 230° opening angle, 1-point locking
• Protection class: IP20
• Cable entry: pre-punched cut-outs at roof, base and rear for cable routing
• Ventilation: ventilation slots and roof prepared for fan module (punched-out mounts)
• Earthing: four earthing points with protective caps (base, side panel and front door)
• Maximum installation depth for components (standard): 369–470 mm

How to use

Unpack the flat-pack components and follow the enclosed installation instructions. Begin by attaching the supplied mounting plate to a suitable wall location using appropriate fixings for the wall type and load; then secure the cabinet housing to the mounting plate. Fit and adjust the front and rear 19" profile rails to the required depth and mount devices according to their rack unit markings. Route cables through the pre-punched entries in the roof, base or rear and use the ventilation provisions or install a fan module on the roof if active cooling is required. Close and lock the front door after installation. Removable side panels simplify access when performing equipment installation or maintenance.

Usage recommendations

Ensure the wall and fixings used for mounting can support the combined weight of the cabinet and installed equipment. Maintain recommended clearance for airflow and cable access, and use appropriate cable management and earthing practices to comply with local installation standards and to ensure system reliability.