DIGITUS SFP+ 10G 5m DAC Cable DN-81224 with SFP+ Connectors, AWG 24 MSA Cisco Compatible

The DIGITUS SFP+ 10G 5m DAC Cable DN-81224 is a high-speed direct attach copper cable designed for reliable network switch and router interconnects. Featuring a length of 5 meters and equipped with SFP+ connectors on both ends, this twinax cable utilizes an AWG 24 wire gauge to ensure stable signal transmission in demanding environments such as data centers and server rooms.

Advantages

This direct attach copper cable offers a cost-effective and energy-efficient alternative to optical transceivers for short-distance connections. With a very low power consumption of just 0.5W, it minimizes heat generation and operational costs within rack setups. The inclusion of DDM and DOM support allows for real-time monitoring of key parameters, helping administrators maintain optimal network performance. Furthermore, its broad multi-vendor compatibility ensures seamless integration with equipment from major manufacturers without requiring proprietary transceivers.

Suitable for

• Connecting 10G network switches and routers within the same rack or adjacent racks
• Data center backbone interconnects over a 5-meter distance
• High-speed storage area networks utilizing Fibre Channel protocols
• Telecommunication applications requiring CPRI and OBSAI standards

When it may not be suitable

This direct attach copper cable is not designed for long-distance network runs exceeding 5 meters, where fiber optic cables and transceivers would be required. It is also incompatible with networking equipment that does not feature standard SFP+ slots or lacks support for MSA-compliant direct attach copper connections.

Key specifications

• Cable length: 5 meters
• Connector types: SFP+ to SFP+
• Wire gauge: AWG 24 Twinax
• Supported data rates: 1.0625 to 10.52 Gbps
• Supported applications: 10G Ethernet, 10G Fibre Channel, Gigabit Ethernet, CPRI, and OBSAI
• Power consumption: 0.5W
• Operating temperature range: 0 to 70 degrees Celsius
• Color: Black

How to use

To install the cable, gently remove the protective dust caps from both SFP+ connectors. Align the connector with the SFP+ port on your network switch, router, or storage device, and push it straight into the slot until the latching mechanism clicks securely into place. To disconnect, pull the release latch mechanism firmly to disengage the lock and carefully slide the connector straight out of the port. Avoid bending the cable too sharply near the connector ends to maintain internal wire integrity.

What to consider before purchase

• Verify that the physical distance between your network devices does not exceed 5 meters
• Check that your switches or routers are equipped with standard SFP+ ports
• Confirm hardware compatibility with MSA-compliant direct attach copper solutions
• Assess your network bandwidth requirements to ensure compatibility with 10G data rates

Usage recommendations: Handle the direct attach copper cable with care during installation, avoiding sharp bends or excessive pulling forces on the connectors. Ensure that operating ambient temperatures remain within the specified range of 0 to 70 degrees Celsius to guarantee reliable long-term performance.