Digitus Gigabit Ethernet PoE+ Injector DN-95103-3 802.3at 30 W 1000 Mbit/s Black

The Digitus Gigabit Ethernet PoE+ Injector is designed to transmit both power and network data over a single Ethernet cable. Supporting the IEEE 802.3at standard, it delivers a power output of up to 30 W and supports data transfer rates of 10, 100, and 1000 Mbit/s. This device is housed in a black enclosure and features two RJ-45 ports, enabling reliable network expansion in environments where traditional power sources are unavailable.

Advantages

This PoE+ injector provides a practical method for supplying power to network peripherals through existing cabling, eliminating the need for separate power lines near the installed devices. It supports automatic detection of connected hardware to maintain an optimal power supply and includes built-in protection mechanisms against short circuits and overloads. The plug-and-play design allows for straightforward installation without requiring complex configurations.

Suitable for

• IP security cameras requiring remote power supply
• VoIP desktop telephones
• Wireless network access points
• Network setups requiring power over standard Ethernet infrastructure

When it may not be suitable

This device is not designed for non-PoE standard devices that lack power-over-ethernet compatibility unless an appropriate splitter is used. It is also unsuitable for high-power industrial applications exceeding the 30 W output limit.

Key specifications

• Gigabit Ethernet data rates up to 1000 Mbit/sIEEE 802.3af and 802.3at PoE standards supportMaximum power output of 30 WTwo RJ-45 ports for input and outputAC input voltage range from 100 to 240 V at 50/60 HzOperating distance up to 100 meters standard, extendable up to 800 meters with compatible extendersDimensions of 142 x 60 x 32 mmBlack color housing with LED status indicator

How to use

Connect the injector to an AC power outlet using the provided electrical parameters. Attach an Ethernet cable from your network switch or router to the input port of the injector. Connect another Ethernet cable from the output port of the injector to the target PoE-powered device. The unit will automatically detect the connected device and begin transmitting power and data simultaneously.

What to consider before purchase

• Verify that your powered device supports the IEEE 802.3af or 802.3at standard and requires no more than 30 WCheck the required cable categories such as Cat5, Cat5e, or Cat6 for optimal gigabit performanceAssess the physical installation environment to ensure operating temperatures remain within the specified range

Ensure that only compatible PoE-enabled devices are connected to the output port to prevent potential equipment damage, and verify that cable lengths adhere to standard networking limits unless specialized extenders are employed.