Kink Protection Sleeves DIGITUS X-ML-OD-BOOT-B/10 blue for RJ45 plugs, for cables up to 7.5 mm diameter

Kink protection sleeves DIGITUS X-ML-OD-BOOT-B/10 are blue protective boots designed to fit over RJ45 plugs and shield the cable-connector junction. Manufactured to accommodate cables with an outer diameter up to 7.5 mm, these sleeves reduce stress at the plug entry point, limit sharp bends and help maintain consistent electrical contact. They are suitable for use in structured cabling, patch panels and field cabling where connector strain relief and improved cable longevity are required.

Advantages

The protective sleeves provide an integrated bend protection profile that reduces the risk of damaged conductor strands and intermittent connections without adding bulk to the connector. Made from flexible material, they slide easily onto terminated RJ45 plugs and stay securely in place during normal handling. Their blue color allows for visual identification of specific cable runs or functions in a rack or patch panel environment.

Suitable for

• Ethernet patch cables and pre-terminated leads
• Patch panel terminations and network cabinets
• Field cabling and on-site installations
• Areas where strain relief and bend protection are required

Key specifications

• Color: blue
• Compatible connector: RJ45 plug boots
• Maximum cable outer diameter: 7.5 mm
• Material: flexible polymer elastomer for strain relief
• Pack configuration: multiple pieces (sold as a set)

How to use

Slide the sleeve onto the cable before terminating the RJ45 plug or, for pre-terminated cables, carefully push the sleeve over the plug until it seats against the plug body and the cable jacket. Ensure the sleeve covers the cable entry point fully and that the bend-protection profile aligns with the direction of expected bending. Check that the clip and latch of the RJ45 plug remain accessible and unobstructed after fitting the sleeve.

Usage recommendations

For optimal protection, use sleeves on cables routed through tight bends or in high-traffic rack areas. Select the sleeve when cable diameter does not exceed 7.5 mm and inspect fitted sleeves periodically for wear. Avoid sharp tools or excessive heat when installing to prevent damage to the sleeve or cable.