Shielded CAT6 FTP Network Cable DS‑IT DC‑FTP6‑100S‑DCA, 100 m, LSZH (Dca)

DS‑IT DC‑FTP6‑100S‑DCA is a shielded CAT6 FTP network cable supplied on a 100 m reel with an LSZH (low smoke zero halogen) outer sheath and Dca-rated fire performance. The cable features a foil shield around the twisted pairs to reduce electromagnetic interference (EMI) and improve signal integrity for Ethernet and structured cabling applications. It is intended for installations where improved noise immunity and safer combustion behaviour are required, such as office networks, data centers and modern residential wiring.

Advantages

The foil-shielded FTP design provides better protection against EMI compared with unshielded cables, which helps maintain higher data transmission quality over CAT6-rated links. The LSZH outer jacket minimizes toxic fumes and dense smoke in case of fire and the Dca fire performance classification ensures compliance with many building safety standards. Packaged on a 100 m reel, the cable is convenient for straightforward deployment and reduces the need for frequent joins.

Suitable for

• Gigabit Ethernet and other Ethernet networks up to CAT6 performance
• Structured cabling in offices, wiring closets and data centers
• Environments with possible electromagnetic interference where shielded cable is preferred
• Installations requiring low-smoke, halogen-free sheathing and Dca fire class

When it may not be suitable

This shielded FTP cable is not intended for outdoor use unless it is routed through appropriate conduits or ducts providing weather protection; the product data does not state UV or direct burial rating. For single-pair or specialty topologies (such as telephone-only or legacy coax systems) this CAT6 data cable will not be an appropriate substitute. If your installation requires higher performance than CAT6 (for example, 10GBASE-T over longer runs), consider cables specified for higher categories.

Key specifications

• Category: CAT6
• Shielding: FTP (foil shield around twisted pairs)
• Length: 100 m reel
• Outer sheath: LSZH (low smoke zero halogen)
• Fire performance class: Dca
• Conductor type: multi-core twisted pairs (solid conductors)

How to use

Measure and cut the required cable length from the 100 m reel and strip the outer LSZH sheath carefully to avoid nicking the inner pairs. Maintain the twist of each pair as much as possible when terminating to RJ45 connectors or patch panels to preserve CAT6 performance. If the foil shield is present, connect the drain wire and shield to the chassis or connector ground according to local grounding practices to ensure effective EMI protection. Route the cable away from high-voltage power lines where possible and follow local installation standards for bend radius, support and fire-stopping.

What to consider before purchase

• Confirm that CAT6 performance meets the bandwidth and distance requirements of your network.
• Ensure that shielded cable and grounding are compatible with your existing infrastructure and connectors.
• Verify that LSZH and Dca fire class fulfill local building and safety regulations for your installation site.
• Plan for conduit or protective routing if the cable will be exposed to outdoor conditions or mechanical stress.

Usage recommendations

Install the cable in indoor horizontal and backbone pathways where low-smoke LSZH materials are required; ensure proper grounding of the foil shield for optimal EMI suppression and follow CAT6 termination practices to achieve the rated performance.