Outdoor UTP Cat6 Cable DS-IT DC-OUT-60-100 — 10 m, 100% Copper, Black

DS-IT DC-OUT-60-100 is an outdoor-rated UTP Cat6 Ethernet cable, 10 meters long, made with 100% copper conductors and a black weather-resistant sheath. It is intended for exterior installations where reliable Gigabit Ethernet connectivity is required for devices such as IP cameras, wireless access points, routers and switches. The cable’s Cat6 classification supports higher bandwidth and reduced crosstalk compared with lower-category cables, making it suitable for data networks in exposed environments.

Advantages

This outdoor UTP Cat6 cable combines solid copper conductors with Cat6 performance to deliver stable signal transmission and support Gigabit speeds. The black UV-resistant outer sheath protects the cable from sunlight and general weather exposure, while the unshielded twisted-pair design maintains flexibility and ease of installation along walls, in conduits, or when run between buildings. The cable’s construction is chosen specifically for outdoor networking applications where reliable data throughput and corrosion resistance of copper conductors are important.

Suitable for (tasks / use cases)

• Connecting outdoor IP cameras to network switches or PoE injectors
• Linking external wireless access points or bridge devices
• Running point-to-point Ethernet between buildings or outdoor cabinets
• Temporary or permanent outdoor network drops for routers and switches

When it may not be suitable

This UTP Cat6 cable is unshielded and therefore may not be ideal in environments with very high electromagnetic interference where shielded cable types are recommended. It is designed for outdoor exposure but should not be used for permanent direct burial unless installed inside a dedicated conduit or rated inner sleeve designed for underground applications. For installations requiring integrated power over long distances with significant voltage drop concerns, a combined power-and-data solution or specialized PoE cabling should be evaluated.

Key specifications

• Category: Cat6 (UTP)
• Length: 10 m
• Conductor material: 100% copper
• Number of pairs: 4 twisted pairs
• Sheath color and type: black, weather-resistant outer jacket
• Intended environment: outdoor/exposed installations
• Performance: supports Gigabit Ethernet

How to use

Measure and route the cable path avoiding sharp bends and prolonged exposure to sources of heat or mechanical stress. Use appropriate outdoor-rated clips, conduit or cable ties to secure runs and provide strain relief near connectors and termination points. Terminate the cable with RJ45 connectors or outdoor-rated keystone jacks following standard T568A or T568B wiring schemes. Where PoE is used, verify power budgets at the switch or injector and ensure connections are protected from moisture with weatherproof enclosures or gel-filled boots at outdoor termination points.

What to consider before purchase

• Confirm required length and add slack for routing and termination
• Verify whether shielded cable or direct-burial rated cable is needed for your environment
• Ensure connectors, glands and enclosures used are compatible with outdoor installations
• Check PoE power budget and voltage drop for long-distance powered devices

Usage recommendations

For best results, route the DS-IT outdoor UTP Cat6 cable through UV-resistant conduit where possible, avoid running parallel to high-voltage power lines, and use weatherproof termination kits at exposed endpoints to maintain signal integrity and prolong service life.