Outdoor UTP Cat6 Network Cable DS-IT DC-OUT-60-500 — 50 m, 100% Copper, Black

DS-IT DC-OUT-60-500 is an outdoor UTP Cat6 network cable engineered for 50 m horizontal runs. The cable uses 100% copper conductors and a UV-resistant black outer jacket to deliver Category 6 performance for Ethernet links in exterior installations where unshielded twisted pair cabling is acceptable. It is intended for burying in conduit, routing along building exteriors, or connecting outdoor network equipment while maintaining signal integrity over the specified length.

Advantages

The cable combines full-copper conductors with Cat6 pair twist specifications to support gigabit Ethernet and reliable data transmission over 50 m. The black outer jacket is designed for outdoor exposure, offering resistance to sunlight and weathering compared with standard indoor jackets. As an unshielded twisted pair (UTP) cable, it is flexible and easier to terminate with standard RJ45 connectors and compatible with common networking hardware such as switches, routers and PoE devices.

Suitable for

• Outdoor Ethernet runs up to 50 m between network devices
• Connecting external IP cameras, outdoor Wi‑Fi access points and PoE devices
• Routing in conduits, along facades, or through sheltered exterior cable trays
• Installations where UTP Cat6 performance is sufficient and shielded cable is not required

When it may not be suitable

This UTP Cat6 cable does not include internal shielding, so it may not be appropriate in environments with high electromagnetic interference (EMI) or where screened cables are mandated. It is specified for 50 m runs; for longer single-run distances or critical backbone segments you should evaluate Cat6a or fiber alternatives designed for extended reach and higher bandwidth.

Key specifications

• Cable category: Cat6 (unshielded twisted pair)
• Conductor material: 100% copper
• Length: 50 m
• Outer jacket color: black
• Intended use: outdoor installations (UV- and weather-resistant jacket)
• Supported applications: Ethernet up to gigabit speeds, Power over Ethernet (depending on connected equipment)

How to use

Plan the route for the 50 m run, avoiding sources of strong electromagnetic interference where possible. Use appropriate outdoor-rated conduits or cable clips to secure the cable along walls or under eaves. Terminate with quality RJ45 connectors or outdoor-rated keystone jacks following standard Cat6 termination practices and test each link with a network cable tester to confirm continuity and pair integrity. When powering devices with PoE, verify that the connected switch or injector and the power budget are compatible with the cable run.

What to consider before purchase

• Confirm that unshielded Cat6 is acceptable for your environment (EMI levels and local codes)
• Ensure 50 m length meets your run requirements; allow extra length for routing and slack
• Check compatibility with your PoE devices and network hardware
• Plan for proper outdoor mounting or conduit to protect the cable from mechanical damage

Usage recommendations

For reliable outdoor performance, route the cable inside conduit where exposed to direct sunlight or physical risk, and perform link testing after installation. If installations face significant electromagnetic interference or require runs longer than 50 m, consider shielded cable variants or fiber-optic solutions.