Solar panel EcoFlow 5006001002 100 W Monocrystalline silicon IP68

The EcoFlow 5006001002 100W flexible solar panel is a lightweight, bendable module designed to conform to curved surfaces such as van roofs or RVs. It uses 182 monocrystalline silicon cells with a 23% efficiency rating, integrated bypass diodes and MPPT-compatible output to charge Power Kits systems or compatible portable power stations. The panel measures 612 × 1055 × 25 mm, has a rated power of 100 W, maximum voltage of 17.1 V and a current of 5.9 A, and carries an IP68 dust and water protection rating for outdoor use.

Advantages

The panel weighs approximately 5.1 lbs (about 2.3 kg) and is around 70% lighter than traditional rigid panels, allowing easier handling and installation. Its flexible construction permits bending up to 258 degrees to fit irregular roof contours without reducing solar input. An ETFE protective film and advanced glass fiber lamination increase durability, while integrated bypass diodes reduce the risk of hot spots. The included 3.3 ft solar cable and universal connector enable compatibility with 48 V systems and most portable power stations.

Suitable for

• Solar charging on campervans, RVs and boats with curved roofs
• Portable power stations and EcoFlow Power Kits
• Temporary or semi-permanent installations where lightweight panels are preferred

Key specifications

• Rated power: 100 W
• Maximum output voltage: 17.1 V
• Maximum current: 5.9 A
• Cell type: Monocrystalline silicon (182 cells)
• Efficiency: 23%
• Dimensions: 612 × 1055 × 25 mm
• Weight: ~5.1 lbs (≈2.3 kg)
• Ingress protection: IP68
• Included cable: 3.3 ft solar cable with universal connector

How to use

Select a clean, unobstructed surface on your vehicle or mounting area that receives adequate sunlight. Use the pre-cut eyelets to hang the panel with hooks or secure it with adhesive suitable for the mounting substrate; ensure the panel curvature does not exceed the manufacturer’s recommended bend. Connect the panel using the supplied solar cable and universal connector to your portable power station, EcoFlow Power Kit, or compatible 48 V system. Verify the connection and monitor charging via your power station’s display or app to confirm MPPT optimization and expected input.

Usage recommendations

For best performance, install the panel where it receives direct sunlight most of the day and avoid prolonged shading. Clean the ETFE surface periodically with fresh water and a soft cloth. When storing, keep the panel flat or loosely rolled without sharp creases and protect connectors from moisture.