Pump Einhell GE-DP 6935 A ECO

The Einhell GE-DP 6935 A ECO is a submersible drainage pump designed for moving large volumes of clean or slightly dirty water. With a declared flow rate of up to 17,500 litres per hour and a maximum delivery head of 9 metres, this model is intended for fast emptying of cellars, pools, flooded areas and rainwater collection containers. The unit is powered by a 690 W motor, supports water temperatures up to 35 °C and is built with a durable plastic housing for corrosion resistance and reduced weight. Compact dimensions and an attached 10 m power cable simplify placement and connection on site.

Advantages

The GE-DP 6935 A ECO combines a high maximum flow with a relatively low power rating for efficient operation. Its plastic housing ensures protection against corrosion and makes the pump easier to carry. The long 10 m cable gives flexibility when positioning the pump without needing additional extension cords. Compact overall size allows for convenient storage and transport. The construction supports continuous operation for typical drainage tasks when used within the specified water temperature range.

Suitable for

• Emptying flooded cellars and basements
• Draining garden ponds and small pools
• Removing rainwater from collection tanks and cisterns
• Temporary drainage on construction sites and renovation work

Key specifications

• Maximum flow rate: 17,500 litres per hour
• Maximum delivery head: 9 metres
• Motor power: 690 W
• Maximum liquid temperature: 35 °C
• Housing material: durable plastic
• Cable length: 10 metres
• Compact dimensions: 262 mm (width) × 280 mm (depth) × 460 mm (height)

How to use

Place the pump on a stable, level surface at the lowest point of the area to be drained. Ensure the power cable and plug remain dry and intact before connecting to a suitably rated electrical outlet. Submerge the pump so that the inlet is fully covered by water but avoid completely burying the discharge outlet. Connect an appropriate hose to the discharge port and secure it to prevent disconnection during operation. Monitor the pump while it runs and switch off the power if the water level drops below the recommended minimum to prevent dry running.

Usage recommendations

Use the pump for clean to slightly dirty water only; avoid pumping liquids with large solids or aggressive chemicals. Regularly inspect the housing and inlet for debris and clean as needed. Store the pump in a dry place protected from freezing temperatures. For prolonged use, allow the motor to rest periodically according to operating conditions and follow local electrical safety regulations when connecting to mains power.